MasterRy88 Posted October 23, 2009 Posted October 23, 2009 (edited) Hey everyone, Ok so im not "new" to overclokcing as this is my second system but this is the first time I have been OCing a mobo other than an asus P5N32-E SLI so im trying to get my bearings. Can people with this mobo post their settings and bold the ones that are most commonly changed??? I did a lot of reading online but its hard to get a grasp with so many people chanign so many things. I have an E8500 im looking to use as well as a QX6850, THANKS! just fill in this template please :-) (these are not my settings btw) ORRRRR just tell me what I should not go beyond>???? thats really what im trying to get at so I dont blow this mobo MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio ...........................: 9 CPU Frequency............................: 3.60GHz Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) .............: 400Mhz PCI Express Frequency (Mhz) .........:100 C.I.A.2 ..................................:[Disabled] Advanced Clock Control CPU Clock Drive...........................: 800mV PCI Express Clock Drive.................: 900 mV CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)....................: 0ps DRAM Performance Control Performance Enhance...................: [sTANDARD] (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ...............: 2.00B Memory Frequency (Mhz) ..............: 800*.......800 DRAM Timing Selectable .................: [Manual] Standard Timing Control CAS Latency Time........................5*......5 tRCD .........................................5*......5 tRP'...........................................5*. .....5 tRAS........................................15*... ...5 Advanced Timing Control - I didn't touch anything in here, everything is set to Auto. Motherboard Voltage Control Load-Line Calibration.....................: Enabled CPU Vcore Edited October 23, 2009 by MasterRy88 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now