Praz Posted May 6, 2009 Posted May 6, 2009 920 @ 225x18 6GB Memory 1800MHz, 8-8-8-24 - Post 1 Of 2 Tried to run enough benches so that most everyone's favorite test of stability would be used. DFI LP UT X58-T3eH8, 04/28 BIOS i7 920 3x2GB OCZ PC3-14400 Reaper 1800MHz 8-8-8-26 225x18, Memory 1800MHz 8-8-8-24 HT On, Turbo Off OCZ 30GB Vertex OCZ 120GB Apex SAPPHIRE 4870 Crossfire OCZ 1000WProXStream - 4 Rail Modified To Single Rail click for larger image click for larger image click for larger image [b][color="Red"]Genie BIOS Setting[/color][/b] [color="Red"]Main BIOS Page[/color] Exit Setup Shut down:............Mode 2 O.C. Fail Retry Counter:.........Enabled O.C. Fail CMOS Reload:...........Disabled PPM Function:....................Disabled Turbo Mode Function:.............Disabled x 1 core Max Turbo Ratio:.........22x x 2 core Max Turbo Ratio:.........21x x 3 core Max Turbo Ratio:.........21x x 4 core Max Turbo Ratio:.........21x CPU Non-Turbo Clock Ratio:.......18x [b]* BCLK/UCLK/QPI Controller Settings *[/b] QPI Control Settings:............Enabled QPI Link Fast Mode:..............Enabled QPI Frequency:...................Auto CPU Base Clock(BCLK):............225 Mhz Boot Up CPU Base Clock:..........Auto PCIE Clock:......................100 Mhz DRAM Frequency:..................BCLK*08 Mhz UnCore Frequency:................BCLK*16 Mhz CPU Spread Spectrum:.............Disabled PCIE Spread Spectrum:............Disabled [color="Red"]CPU Feature[/color] Set VR Current Limit Max:........Enabled Thermal Management Control:......Disabled EIST Function:...................Enabled CxE Function:....................Auto Execute Disable Bit:.............Enabled Virtualization Technology:.......Enabled [b]***** Logical Processor Setting *****[/b] Intel HT Technology:.............Enabled Active Processor Cores:..........All [color="Red"]DRAM Timing[/color] Channel Interleave Setting:......Auto Rank Interleave Setting:.........Auto Memory LowGap:...................1536M DRAM Command Rate:...............1N CAS Latency Time (tCL):..........8 RAS# to CAS# Delay (tRCD):.......8 Precharge Delay (tRP):...........8 RAS# Precharge (tRAS):...........24 REF to ACT Delay (tRFC):.........74 Write to PRE Delay (tWR):........Auto Rank Write to Read (tWTR):.......Auto ACT to ACT Delay (tRRD):.........5 Row Cycle Time (tRC):............Auto Read CAS# Precharge (tRTP):......Auto Four ACT WIN Time (tFAW):........20 Ch1 Round trip latency...........Auto Ch1 Round trip latency...........Auto Ch1 Round trip latency...........+1 tREFI............................Auto [color="Red"]Voltage Setting[/color] O.C. Shut Down Free:.............Enable O.C.S.D.F CPU VID Control:.................1.36875 CPU VID Special Add Limit:.......Disabled CPU VID Special Add:.............103.77% Vcore Droop Control:.............Enabled DRAM Bus Voltage:................1.650v DRAM PWM Switch Frequency:.......Nominal Frequency DRAM PWM Phase Control:..........2 Phase Operation CPU VTT Special Add:.............Auto CPU VTT Voltage:.................1.34v VTT PWM Switch Frequency:........Nominal Frequency VTT PWM Phase Control:...........2 Phase Operation CPU PLL Voltage:.................1.80v IOH/ICH 1.1V Voltage:............1.15v IOH Analog Voltage:..............1.10v ICH 1.5 Voltage:.................1.5v ICH 1.05V Voltage:...............1.05v DIMM 1/2 DQ/DQSTB Bus VREF:......-00.0% DIMM 3/4 DQ/DQSTB Bus VREF:......-00.0% DIMM 5/6 DQ/DQSTB Bus VREF:......-00.0% ADDR/CMD VREF Control:...........Disabled x DIMM 1/2 ADDR/CMD Bus VREF:.....110 x DIMM 3/4 ADDR/CMD Bus VREF:.....110 x DIMM 5/6 ADDR/CMD Bus VREF:.....110 CPU QPI Drive Strength:..........Strong IOH QPI Drive Strength:..........Normal click for larger image click for larger image click for larger image click for larger image CPU-Z Validation Quote Share this post Link to post Share on other sites More sharing options...
Praz Posted May 6, 2009 Posted May 6, 2009 920 @ 225x18 6GB Memory 1800MHz, 8-8-8-24 - Post 2 Of 2 Windows 7 64Bit click for larger image click for larger image click for larger image click for larger image click for larger image 3dx Max 2009 w/V-ray Time to render: 5min 56sec click for larger image TMPGEnc XPress 1GB VOB file ripped from DVD movie click for larger image click for larger image Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.