bonehead Posted July 23, 2002 Posted July 23, 2002 I've put together MSI kt3 ultra motherboard, Athlon 1800x, Maxter hard drive & MSI 4200 stock clocking at 250/446. When I run 3DMark2001 S.E. with latest patch, the polygon portion of the batch almost always freezes. If I disable that part of the batch I can overclock to 300/586 with no artifacts at all. I have no idea why the polygons are such a leap for my system. Any suggestions? I hope Put in latest drivers for card. cpu temps 105/117 when working hard. 2700.DDR.256 Share this post Link to post Share on other sites More sharing options...
Bosco Posted July 23, 2002 Posted July 23, 2002 Does it do the samething when you use the stock driver? <_> Share this post Link to post Share on other sites More sharing options...
bonehead Posted July 23, 2002 Posted July 23, 2002 Yea, stock driver did the same. Share this post Link to post Share on other sites More sharing options...
Bosco Posted July 23, 2002 Posted July 23, 2002 I have you tried changing the best appearance option on the card to best performance? <_> Share this post Link to post Share on other sites More sharing options...
bonehead Posted July 23, 2002 Posted July 23, 2002 No I havn't tried the best appearence/to best performance option yet. I guess I assumed that a G4 could handle whatever was tossed at it. I'll give it a try. Thanks ! Share this post Link to post Share on other sites More sharing options...
Bosco Posted July 23, 2002 Posted July 23, 2002 Well it should but! Let me know if it works or not. Share this post Link to post Share on other sites More sharing options...
Shaggy Posted July 23, 2002 Posted July 23, 2002 You should double check that you have Direct X 8.1. I don't know, maybe you could just reinstall it. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now