NeedTurbo Posted December 3, 2008 Posted December 3, 2008 (edited) Hi guys, I'm kinda new to overclocking and just bought some pc 8500 for my Abit In9 32x-max. It took me all day yesterday to work with this memory, and I really didn't acomplish anything. It was habitualy unstable at various speeds. 800 4-4-4-12, 1066 5-5-5-15 even 7-7-7-20 (all at 2T). But today on lunch in about 30 mins I managed to get a decent clock on the memory, but with a lower clock on the cpu. Memtest ran for about 30 mins about 50%pass. What should I try to allow for more fsb? Edited December 3, 2008 by NeedTurbo Share this post Link to post Share on other sites More sharing options...
The Smith Posted December 3, 2008 Posted December 3, 2008 You can try raising the core voltage, RAM voltage, the FSB voltage and the NB voltage. Good luck Share this post Link to post Share on other sites More sharing options...
NeedTurbo Posted December 3, 2008 Posted December 3, 2008 OK. But really would it be safe to push the nb further? I did just put a 40x40x10 fan on it yesterday, but 1.55 would be max and only 0.05 more... Also in my situation Fsb v is called HT v not vvt right? ( vvt is for q cores?) What Ram voltage should I max? I just put a ram cooler with 2 40x40 fans.... Also i have a Antec 900 with like 4 120's, 1 210. (fans) Share this post Link to post Share on other sites More sharing options...
hardnrg Posted December 3, 2008 Posted December 3, 2008 the 780i sticky guide applies pretty much directly to the 680i too - http://forums.overclockersclub.com/index.php?showtopic=77324 Share this post Link to post Share on other sites More sharing options...
NeedTurbo Posted December 3, 2008 Posted December 3, 2008 What is the fsb voltage on my board? Is ts Cpu vvt? Ht? Either those or I dont have an option to adjust fsb voltage.. weird... Abit IN9 3x-Max Share this post Link to post Share on other sites More sharing options...
The Smith Posted December 3, 2008 Posted December 3, 2008 OK. But really would it be safe to push the nb further? I did just put a 40x40x10 fan on it yesterday, but 1.55 would be max and only 0.05 more... Also in my situation Fsb v is called HT v not vvt right? ( vvt is for q cores?) What Ram voltage should I max? I just put a ram cooler with 2 40x40 fans.... Also i have a Antec 900 with like 4 120's, 1 210. (fans) If you're not sure what some options in the BIOS are for, refer to your motherboard user's manual, you will find an explanation for every setting. And the RAM voltage will depend from the one you've got. Some require higher stock voltages than others. It should be written probably on a sticker on the RAM sticks. Share this post Link to post Share on other sites More sharing options...
NeedTurbo Posted December 3, 2008 Posted December 3, 2008 I raised the CpuVVT voltage to 1.4 It added alot of visual stability, Windows loaded startups 4x faster. Right now I'm at 3.2 Stable, Vcore: 1.38 I tried Raising the Vcore to 1.4 and The ram 0.1+ to 2.2, but it wouldnt boot windows. Time to loosen latencys? Share this post Link to post Share on other sites More sharing options...
hardnrg Posted December 3, 2008 Posted December 3, 2008 FSB = HT (in terms of voltage) Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now