p35 t2r LT 52 error (Need help)

[srdjan011]

Okay, my q6600 was clocked @3.0 without increasing the voltages anywhere.

Then i increased voltages for SB to 1.150v for SB core to 1.750V for NB core to 1.400v, and for CPU VTT to 1.25v and saved my settings. But, it won't boot. It stops at showing the LOGO,and it just stays there. It won't get into the BIOS, and the diagnostic led shows 52. I also increased my voltages for just one level at CPU VID control, and CPU VID special add.

 

THe rest of my configuration is:

GeIL BD Evo ONe @800MHz, 4-4-4-12 2x1GB

Q6600 G0

CHieftec 550W

XFX 8800 GT 512

Seagate 160 GB sata 2

 

EDIT: I also cleared the cmos, and it stays as it was.

Removed my battery, i also used a clear CMOS jumper, without the cable pluged in the PSU, and same thing happens.

Tried with using different slots for RAM, but same thing. Also i want to say thet it all worked fine until i increased voltages.

 

Thanks

[radodrill]

Have you tried an extended clear CMOS (30 min +) then boot with only 1 stick of RAM?

 

Also, it wouldn't hurt to try it as a minimal build outside the case.

[srdjan011]

I made it to boot in too the BIOS with only one modul, and i increased the voltage to 2V for memory,then i put the other one back in,and the problem was solved.

Thanx:angel: