ring.of.steel Posted April 10, 2007 Posted April 10, 2007 Hi, i have has this problem for a while now. when i turn on my computer it posts and everything and on the next screen i get all the device info then just a blinking cursor, after about 3 seconds the computer reboots. It might take 5 trys to get it to boot windows some days. Does anyone know anthing about this problem? Share this post Link to post Share on other sites More sharing options...
Gipse Posted April 10, 2007 Posted April 10, 2007 Have a look at your PSU... 430W are simply not enough to power up your rig properly. Get one from THE list: http://www.diy-street.com/forum/showthread.php?t=73137 Gipse Share this post Link to post Share on other sites More sharing options...
Sharp Posted April 10, 2007 Posted April 10, 2007 Hello, Do you have all 4 power connectors plugged into the board? - 24pin ATX - 4pin +12v P4 connector - Molex on top the chipset fan - Molex under the CPU socket Does it hand at the verifying DMI pool... or before that? Usually this happens when the memory timings are incorrect. Are your 4x256MB sticks exactly the same? (Bought at the same time) What are the rated memory timings, eg 2.5-3-3-6. Go into the BIOS and increase the memory voltage to 2.8v. And do this. (Genie settings >DRAM configuration) CPC = Disabled Max async latency = 6ns Dram response = Normal Read Preamble = 5ns Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now