Gunner{DnD} Posted January 5, 2007 Posted January 5, 2007 I just got my Opty 170 and went threw all the Oc'ing Procedures I made it to 3 gig and ran apps in Windows but P95 it was unstable So I backed down to 2950 and its running stable now...Anyway my concern is the Temps Im hitting 46-48 on load water cooled at 1.42v That seem kind of hi? Also when I was at 3000mhz the PC would just shutdown at reboot...would that be a PSU issue My voltages are +3.3 @3.22 +5 @ 4.86 +12 @ 11.86 any Ideas? Share this post Link to post Share on other sites More sharing options...
CustomBuild Posted January 5, 2007 Posted January 5, 2007 Your temps are high. I run 2950MHz at 1.44 and my temps run ~41 at load (dual Prime). I run 3GHz @1.48 and load temps are 42-43. As it is my temps are a few degrees higher then they should be. I doubt your shut down problem at 3GHz is PSU related. You have a decient PSU with enough power. The ATX spec is +/-10% on the various rails so your's looks to be in spec. Odds are at 3GHz you did not have enough Vcore, HTT multi was too high, or RAM ratio or timings caused a failure. If you can get your temps in line I would try 3GHz again and just go through everything and make sure all the settings are correct. Share this post Link to post Share on other sites More sharing options...
Gunner{DnD} Posted January 5, 2007 Posted January 5, 2007 I just cant figure out the temp issue it ran cool with my 3700 but with this mbm5 45 everest 45 speed fan shows core 1 28 core 2 28 :confused: Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now