law_freak Posted August 2, 2006 Posted August 2, 2006 Today I woke up to the sound of an alarm coming from my computer. I tried to shake the mouse but everything was frozen. Then I tried to turn of the computer. That didn't work. Then I pressed the reset which worked. However it froze again at the LanParty image, then it moved on and froze after it had backed up the CMOS. So next I turned it off and then the power supply, I left it off for a few secs. When I tried to turn it on nothing. No LED no beep nothing. I checked the cable in the back. Tried to push it further into the connection on the PS. I wiggled it a little and heard a very faint electical sound like buzz. What now? Share this post Link to post Share on other sites More sharing options...
ace1981 Posted August 2, 2006 Posted August 2, 2006 is there any thing from the psu if so --- is the motherbourd light on and one next to ddr slots if there power on your mobo there should be lights turn on pc and what does the diag lights say? if its power then try and swap out the family pc psu and see if it boots Share this post Link to post Share on other sites More sharing options...
law_freak Posted August 2, 2006 Posted August 2, 2006 no power geting to MB. No lights at all Share this post Link to post Share on other sites More sharing options...
law_freak Posted August 2, 2006 Posted August 2, 2006 Im pretty sure Ive pinpointed the prob to the hard drive. I let it run a while longer and got a boot failure message Share this post Link to post Share on other sites More sharing options...
law_freak Posted August 2, 2006 Posted August 2, 2006 is there any thing else that could be wrong? Ill try a new HD but I need to know what the alarm means. Before I plug in the new one. Share this post Link to post Share on other sites More sharing options...
ace1981 Posted August 2, 2006 Posted August 2, 2006 hi if you got no power to mobo how did you receive the error message? oh hard disks and cd roms dont stop power from being turned on unless there a short cirtiut so if you got power you should be able to get in the bios my advice is to unplug all disk drives and just boot up with one stick of ddr and cpu and mobo and gfx then report back if there completly no power at all not even a millisecond surge when you press the power button if it does that then its a short circiut cya m8 good luck and report back Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now