facasi
Members-
Posts
25 -
Joined
-
Last visited
facasi's Achievements
Newbie (1/14)
-
I have not test Memtest for that long, I have used it fot 45 min max without errors. The timmings are 2.5-4-3-10 @2.9V CPU V = 1.52 Details on bios settings: 200 enable 2.5 04 10 03 12 14 03 03 02 03 3072 01 Enable Incrase 255 7 2 0.7 0.5 256 disable 16X 07X Disable(8)
-
I am getting error at Super PI 4M .. what do you suggest?
-
Hi guys! What are your opinions on these benchmarks results for a 3200+ overclocked? Thanks...
-
Thanks!
-
HI, I was running Prime 95 and the actual temps are: CPU = 46 C PWM IC = 48 C CHIPSET = 52 C Please see the attached picture The ones I think is high are PWM IC and the CHIPSET temps What do you guys think??
-
NF4-Ultra D Not booting up !
facasi replied to facasi's topic in Processors, Motherboards and Memory
? -
Hello guys, I have problems with my system. Yesterday I was playing Colin MCRae Rally and my computer reboot automatically. After that, the computer can't boot up. I have not overclocking at all. The board LED's shows on red the first 3 from left to right. I removed the rams dimms but nothing happens and put them individually again but nothing happens. The case power green light blinks continuously. System specs AMD 64 3200+ Winchester DFI Lanparty NF4 Ultra-D 1 GB Corsair XMS512-3200C2 (2 X 512MB) XFX GeForce 6600 GT PCI-E Zalman 7700-Cu HSF OCZ 520W Powerstream PSU 2 Maxtor SATA on RAID 0 (2 X120GB) 2 x 120mm Case Fans Front (Intake) & Back (Exhaust) Please need help!!! Thanks,
-
I want to make overcklocking to my system. I am new with AMD & DFI ( Previous a P4 & ASUS). The specs are: DFI Lanparty NF4 Ultra-D 1GB Corsair XMS512-3200C2 (2 X 512MB) Athlon 64 3200+ Winchester XFX 6600GT Geforce Video Card PCI-E 2 x 120GB Maxtor SATA HD on Raid 0 Zalman 7700-CU HSF 2x 120 mm Case Fans (Front intake - Rear out) OCZ Powerstream 520w PSU Bios 2/09 Do you know a good bios set up for my system? or where can I see some set ups? Thank you!
-
what's is a good overcloking set up for this system? I am new with AMD and DFI. I had a P4 overclocked from 2.4 at 3.023 GHZ limited by the memory
-
This have heat spreaders. I put the vdimm to 2.9v and test #5 pass. I got two red lines at 2.8V before
-
is that vdimm safe for my corsair xms?
-
System: Amd 64 3200+ Lanparty UT NF4 Ultra-D 1 GB Corsair XMS3200C2 (512mb x 2) XFX GeForce 6600GT 2 x 120 GB Maxtor SATA on RAID 0 Nec 3500 16X DVD Writer OCZ Powerstream 520W Bios 2/09 I have not overclocked my system yet. All the voltages and set up are by default. After flashed to bios 2/9. when running memtest I am getting erros during the Test # 5. I don't think is a problem with my ram since I was using the same sticks in my other computer and running the same test (win a P4 system). What do you think I have to do? Increase the voltage for the ram? Another thing: Should I use the yellow slots for the pair of rams or the orange ones. Actually they are placed on the orange ones (slots 2 & 4) Thanks,