-
Posts
130 -
Joined
-
Last visited
About alajarvi84
- Birthday 05/09/1984
Profile Information
-
Gender
Male
-
Location
Finland
-
Interests
Modding everything from cars to pc;s.. Taking care of my kids.. Trying to keep my gf ;D
Gaming
-
Steam
alajarvi84
OCC
-
Computer Specs
At this time using a HP touchsmart iq820sc, starting to build a rig around EVGA Classified SR2 with two xeon;s and 4 fermi gpu;s Images are posted later.. Still choosing a case, maybe corsair.
Contact Methods
-
MSN
Ville Alaj
-
ICQ
0
alajarvi84's Achievements
Newbie (1/14)
-
-
-
Ok, thanks.
-
Hello again ;D Been a few years from my last post here.. I've been working hard and raising my kid.. Havent tuned up anything sense then, but tought that now could be a good time to start building a brand new setup. The thing is that i dont actually know where to start :eek2: Any suggestions for a DFI based mobo or something ? I tought that i buy a intel quadcore cpu (s774) and two 9800 series gpu:s.. Thanks in advance
-
I've had some problems finding a good cooling solution for my dr-expert board. Tried with the original , extreme spirit and now using thermalright high riser 05... The highriser keeps the mobo temps at 36-45*C First i had to rip off the original cooling of the gtx cards.. both of those should fit if i would take the fan off from the highriser, but it would heat up too much !!? Help please... Some good cooling solutions for my board PLEASE
-
Oh and btw , i have 2 7900gtx gpu,s but my mobo cooler is so big that i could fit only 1 on place The original mobo cooler is too weak... i dont know how i fit both of those inside
-
Ok , i would go for the opty170 !? whats the difference of those "L2" ? "mhz" ? Ive never even investigated those optys So i dont know anything about those... Are my coolers good enough to try the 3ghz with opty ?
-
About a 1.5 years ago i had 4800+x2 , i tried to oc it to 2.75ghz but no luck... Those days i had a seasonic 600w power wich after i sold the cpu & psu cleared to me that it was FACTORY FAULTY model "Darned" Oh and the mobo was A8N-SLi Premium. So should that 4800+x2 oc just fine or should i go for the FX series (fx-60) ???
-
Hi, im going to start building a new machine soon , so i tought to put this pc for "LAN" gaming with friends I just tought that i should buy a proper s939 cpu to this pc... I would like recommendations to a good overclocking cpu !!? How the dual cores OC ? i tought something like "4800+X2 or FX-60 or FX-57" ??? Please some advices :confused:
-
Hi everybody ! Had a coupple of threads before about my sata drives dying when oc:n. Now those are workin PERFECT Just changed all the ERRATA options to enabled , enabled the sil3114 "SATA" option , double checked every bios options from the net , reinstalled windows , updated sil3114 sata controller , didnt install nvidias storage controller at all Sata drives now work like they should, wont fragment anymore Thanx from all the repplies , this is how its done
-
3700+ at 2.81ghz - prime95 prob
alajarvi84 replied to alajarvi84's topic in Overclocking and Cooling
Btw , had a thread before about my sata hdd:s... readed from another forum that i shouldnt use the nvidias ethernet and mass storage drivers ??? That guy said that this was ridden in "dfi-street" ?? Should i uninstall those ? wich ones (the texts on the add/remove section are different) -
3700+ at 2.81ghz - prime95 prob
alajarvi84 replied to alajarvi84's topic in Overclocking and Cooling
yeah... back on 250fsb... runned prime 24h without errors So not going faster with this cpu memory runs at 1T.3.3.8.2.7.14.2.2.1.2.3120.enab.skew:increase.8/4. 6ns.5,0ns. normal. 0clks.7x.16x.... Mem is fine now (if i can tighten a bit=please notify ) Waiting for the amd,s 4X4 platform to start building a new toaster... its very interesting the intels 4core sounds like intel has lost it again :D 4X4 has 2fsb,s and both sockets have their own ddr2 capable memory slots :eek: So that would make like this ---> 2 Dualcore cpu's (fx-62 or something..) 2x 2gb redline xp28000 ddr2 memorys (i allready have) Dfi,s (when it comes) 4x4 mobo quad sli 7950 (x2) GPU,s (i have 1 allready) Soundblaster x-fi fatality (never stop using) 2x HIPER type-r 580e psu,s (have allready) ordered from germany Coolermaster stacker (server edition) (have allready) Would that be a good start ? i could go for the intel if its better , but i think it isnt anymore -
3700+ at 2.81ghz - prime95 prob
alajarvi84 replied to alajarvi84's topic in Overclocking and Cooling
Oh , btw.. should i rise the HT to 4x ?? it would be like 1008mhz ??? If ive understanded correctle , the dfi boards can handle a little oc on the HT ??? -
3700+ at 2.81ghz - prime95 prob
alajarvi84 replied to alajarvi84's topic in Overclocking and Cooling
BTW with 1.6v vcore system recraped to boot at all at 255fsb :D So this is it for my cpu.... -
3700+ at 2.81ghz - prime95 prob
alajarvi84 replied to alajarvi84's topic in Overclocking and Cooling
The problem was simply that the cpu didnt go any higher... Tried at 255 =nope , 254=nope , 253=almost , 252=success 2.77ghz Damn this is a budget piece of S**T 3700+ Oh well... What tests should i try first at prime95 to make sure i should even start running 24h ??? Simply meaning the toughest tests ! Runned allready some "max heat" ?? test Temps stayed below 47*C cpu & 40*C mobo See pic !