H8tulooze

This is where I used to be before taking all apart and redoing. Now I cant back to it. Sorry I dont have the mem settings on the 3.0Ghz. http://img348.imageshack.us/img348/3656/u4...ckoemair0ru.jpg http://img332.imageshack.us/img332/857/2893kt.jpg

Thx Praz

Whoops forgot to plug in two smaller ones, now up to 2.75Ghz

With 3 chips now. One Opty 146 and two 165's. Not sure whats up See sig for specs. I has this same set up in another pc and got in up to 3ghz on OEM air. Maybe I dont have my DFI settings right? Ive ran all my mem div. from 1:1 to 133 and still teh same result wall at 2.55Mhz. Any suggestiosn would be great. Does it matter if I use a 20 pin power plug or 24? I use a 20 now. 3-4-8-4-7-13-2-2-2-3

I tried ambiant water and the same result. Do you think maybe the HS is not seated well on the CPU?

OK heres the deal, i built a rig on air, hit 3gh, np prob. Put the rig on chilled water cant even get stable at 2.8Ghz. same settings etc. I dont mess with the timings, all auto. Any help would be great [email protected] icq=154427884 Thx Opty 146 G-skill 2x1gig DangerDen HS 5c idle Lan Party Ultra D stock bios 7800gt

Any news for timings to set me above 3ghz?

Im on 5/6 Divider now, just looking for some good settings on timings. On the water chiller, I went to Lowes and bought 5cu freezer, drilled couple of holes in the side, bought a 185Gph pump, and Bought a Danger Den. BAM! colder then cold water.

I read alot of post in the sticky section. From what I read and seen, I think my chip can do 3.2-3.3 on my water chiller set-up. Ok I have an Opteron 146, vcore 1.65 Specs:939 opty 146@3Ghz G-skill pc4000 2x1gb (Auto timings) Nf4 dfi ultra D Danger Den HS 7800gt Temps 5c 9c ld Settings are 300x10 1T(not stable) Tried 2T still not stable. I was able to do 3Ghz on Stock OEM cooling, so not sure why on 5c water I cant do more. Any help would be great and Ss of bios or what ever would work.

Any thing on the LED's? How many should be lit? Thx

IM having the same prob, first I dl'd winflash and flashed it. It wouldnt boot, I called DFI, they sent me a new bios chip. Same prob, I have 4 LED"s on bottom. How many am i suppose to have?