Freek

Intel Stock Cooler :nod: , max temp. 57c , idle 45c.

I`ve done the mod, and max FSB now is 250Mhz. So th emod works just fine.

The problems is that the board will not allow overclock over 133FSB*18=2.4GHz But this CPU can hit 3.0Ghz with no problem, I˙ve tried it on Abit IS7-E. I talked to Angry and he said that the bios support and features for the old "a" pentium series is low. And that the board is programmed not give more than 133FSB. But if I make him a stock procesor on 2.4GHz and 533FSB would that change and recnognize the CPU diferently???

Yeah the proc is 1.8aGhz 400FSB, on 2.4GHz its 533FSB. But if I make him run stock with 2.4Ghz 533FSB will that fake the motherboards ID. Because before this I had a ASUS with Sis645chipset and could put the proc 2.4Ghz and the memory 400Mhz and it workde just fine. The I bought this board, because I`ve thought that it is much better. But considering my cpu this board is crap for me.

Would it helped, if I do the mod on the CPU that will make him run stock on 2.4Ghz 533FSB, because if I bend one pin on the CPU it will convert my 1.8Ghz 400FSB stock to 2.4GHz 533FSB stock???

Is it possiblle that didn`t recognized my cpu propertly because on stock it is 1.8Ghz and 400MhzFSB???

I only have DDR 266Mhz and auto nothing else??, "CPU CLOCK " option in genie bios i don`t have???

I have this board and Intel P4 1.8a and 256MB Infenion 333Mhz stick. I had before Asus with Sis645 chipset and I could overclock over 2.4Ghz my CPU. But with this board I can only put 133Mhz FSB which means 2.4Ghz, there is no CPU:DDR ratio, And my memory is recognized at 266Mhz module but it is a 333Mhz modul??? Whats wrong i have the letest bios on it???

I could go 210 without the L12 mod, with these voltages: CpU=1.85V Chipset=1.9V VDimm=2.8V AGP=1.7V but with the L12 mod the far I can go is 200Mhz. And about the CPU it runs 0-24h at 1833Mhz with 1.3V

Yes.

Lanparty Rev.A 2500+ Desktop edition, non-mobile, but it can work on "stock" speeds with 1.3V. WD Expert 9.5GB 256MB RAM Infenion 333Mhz FX5200 Gainward

A very STRANGE thing happened. The L12 mod had decresed my FSB stability:confused: So I removed the wires.

I`m not nervous, that`s why my nickname is "Freek" because I modd everything I have:D For the 200FSB I only need one wire. I tried it a half a year ago , an the board wouldn`t post:mad: . I`ll try it again. My current max FSB is 210 with pc2700 333Mhz Infenion memory.

@king of nothing: I see you have a LP.rev A also. What`s your FSB.??

you have to put two wires into the socket for mobile XP, but only one for desktop edirtion???