ViCTRiX Posted June 20, 2010 Posted June 20, 2010 Hi all. I'm new at OCC's forums.i've registered for gettin help.because i thought best place for my problem. and will be good experience for me.i tried to write my best, sorry for if i fault. I didnt use my system in last 2 months about my exams. i configured it yesterday and my bios settings were defeault. i did my all ram timings stable when i put away my system. i saw yesterday settings were default. today i updated my bios to F5 but i cant get stable timings.my rams stable at OCCT,LinX and memtest86 but they fault in prime95 and orthos in blend test.i m gettin fatal roundin error. i thought problem was voltages.i increased NB voltage,still fault. tried relaxin timings again fault in prime95.there is no O/C on CPU and GPU. i will buy better CPU cooler because my Phenom II 940 gettin too hot in Prime95. it saw 70 celcius.i didnt trust stock cooler.here is I just want to use my OCZ Reaper's at 1066mhz without O/C other components. i will o/c my cpu after buyin new cooler. my old stable timings were 5-5-5-15 2T @ 2.1-2.2V TRC=36 TRFC was 195ns i didnt understand on bios. and 1.35v NB voltage. I need help right here forum.What can i do for using my OCZ's at 1066 mhz with good timings.i dont need O/C CPU for now. THANKS for all comments and helps. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now