NightSkeeter Posted March 8, 2010 Posted March 8, 2010 Here are the typical settings iv'e already learned and understand just so you get on the same page as to where I have questions so we can get right into the problem zone. SYSTEM: P5Q Pro, with E8400 E0, G.skill DDR2 1000. SETTINGS: That I understand so far. Core Speed - 3599.9-3600.0Mhz Multiplier - X9 FSB - 400 DRAM - 801 (DDR2 1000 G.skills) DRAM Frequency - 400.0 Mhz, FSB 1:1 with 5-5-5-15-52-2T. (2.0)volts CPU Core Voltage - 1.216v-1.224v Idle It seems to move slightly on it's own free will, 1.232v When Primes running and doesnt get any higher. Is this normal? DRAM static read timing - Disabled Dram Read training - Disabled ----------------------------------------------------------------------------------------------------------------------------- ******Ok, now here's where I could use some help.********** Commands on Auto by Default and are the ones I'm seeking advice for if I should Change them any. NB voltage - Auto SB voltage - Auto CPU PLL Voltage - Auto PCIE Sata Voltage - Auto FSB strap to northbridge - Auto CPU Clock Skew - Auto NB clock Skew - Auto CPU margin Enhancement - Optimized - (Is there any reason to change it to Performance mode?) A.I. Transaction Booster - Auto Mem. O.C. Charger - Auto Intel Virtualization tech - is Enabled A.I. Clock twister - Auto (But has settings of Lighter, light, moderate, strong, stronger) After one hour Prime small FFTS - Max 54c. Core Temperatures. Passed Test, no errors. BSODS, nothing at all seems to be wrong. I'll do a longer test later tonight. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now