P5Q Pro Help with extra Overclocking options

[NightSkeeter]

Here are the typical settings iv'e already learned and understand just so you get on the same page as to where I have questions so we can get right into the problem zone.

 

 

SYSTEM: P5Q Pro, with E8400 E0, G.skill DDR2 1000.

 

 

SETTINGS: That I understand so far.

 

Core Speed - 3599.9-3600.0Mhz

Multiplier - X9

FSB - 400

DRAM - 801 (DDR2 1000 G.skills)

DRAM Frequency - 400.0 Mhz, FSB 1:1 with 5-5-5-15-52-2T. (2.0)volts

CPU Core Voltage - 1.216v-1.224v Idle It seems to move slightly on it's own free will, 1.232v When Primes running and doesnt get any higher. Is this normal?

 

DRAM static read timing - Disabled

Dram Read training - Disabled

-----------------------------------------------------------------------------------------------------------------------------

 

 

******Ok, now here's where I could use some help.**********

 

Commands on Auto by Default and are the ones I'm seeking advice for if I should Change them any.

 

NB voltage - Auto

SB voltage - Auto

CPU PLL Voltage - Auto

PCIE Sata Voltage - Auto

FSB strap to northbridge - Auto

CPU Clock Skew - Auto

NB clock Skew - Auto

CPU margin Enhancement - Optimized - (Is there any reason to change it to Performance mode?)

A.I. Transaction Booster - Auto

Mem. O.C. Charger - Auto

Intel Virtualization tech - is Enabled

A.I. Clock twister - Auto (But has settings of Lighter, light, moderate, strong, stronger)

 

 

 

After one hour Prime small FFTS - Max 54c. Core Temperatures. Passed Test, no errors. BSODS, nothing at all seems to be wrong. I'll do a longer test later tonight.