Jimmy Question Posted December 8, 2006 Posted December 8, 2006 I've got the 3 1/2 floppy made and booted into MemTest, but I'm not quite sure what I am doing. First, does memtest test the memory at the CPU speed and timings that are in the CMOS ? If so, then why does MemTest allow you to change the timings. What about voltage ? I couldn't find anywhere in MemTest to adjust voltage, so does it use what is set in CMOS ? If there is no connection between the CMOS and MemTest, then how can you change the DDr to see how it overclocks ? Is there a guide on this somewhere ? Thanks in advance, Jimmy Share this post Link to post Share on other sites More sharing options...
Praz Posted December 8, 2006 Posted December 8, 2006 Change all timings and voltages in the Bios. Use Memtest to test those changes. Click on the "Stability Testing Programs" link in my sig. Share this post Link to post Share on other sites More sharing options...
Jimmy Question Posted December 8, 2006 Posted December 8, 2006 Last night I ran my G. Skill DDR400 "HX" memory at 3-4-4-8 all night long at DDR550. Not really knowing what I was doing, I set the divider on a 1:1 and then adjusted the CPU/HTT until the DDR was at 550. I left the voltages & everything else alone. Now I don't know what to do next. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now