backistani Posted August 22, 2005 Posted August 22, 2005 Hello @ All ! I have a LanParty UT nF4 Ultra-D since a few days. A really wonderful board ! But now i have a little problem. My DDR RAM (memory) is 2 x 512MB Corsair TWINX4400C25 with 550 Mhz. But my board show my memory on boot with only 400 Mhz.:sad: How can i get work my memory with 550 Mhz??? Can anybody tell me what i must change in my bios settings to get the 550 Mhz for my memory? My bios version is 623_3. thanx for ur help ! best wishes from germany Andre Share this post Link to post Share on other sites More sharing options...
prodigy_ Posted August 22, 2005 Posted August 22, 2005 During POST (at boot) system doesn't show you any actual values, only relative ones. "DDR400" thus only means that you're using 200/1:1 divider. (Btw, create a signature with your system specs. You can use mine as a guideline.) Anyway 623-3 BIOS doesn't allow you to use higher freq for memory than your current HTT freq. So if you're not OCed, than 1:1 (200 Mhz) is your best option. To get any higher you should either OC your CPU (increase HTT) or flash a beta (702) BIOS which allows you to set RAM freq higher than HTT. Share this post Link to post Share on other sites More sharing options...
backistani Posted August 23, 2005 Posted August 23, 2005 To get any higher you should either OC your CPU (increase HTT) or flash a beta (702) BIOS which allows you to set RAM freq higher than HTT. Where can i get this beta bios? Have u tested it? thx for ur help. Share this post Link to post Share on other sites More sharing options...
red930 Posted August 23, 2005 Posted August 23, 2005 I did a forum search and came up w/a good thread for ya, http://www.dfi-street.com/forum/showthread...ghlight=corsair Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now