Unsealed

Everything is running super smooth now! Thanks a lot for the help everyone! PS: sorry for the delay had a private SOA exam Which i passed! Woot now back to gaming/Ocing xD This thread is done! Ty everyone again!

Arright a new update! For some reason, i dunno which one and what happened i have been changing drivers a lot, i'm on the latest beta atm, and i'm finally not lagging at all in battlefield bad company 2! Average 50 fps on high graphics! Could be improved but i'm quite happy i can play with fluid fps! Vsync is off everything on high, 4x AA and i go from 40 - 70 fps. Mostly stays in the lower 50's!

I'm @ 1440X900 and it's an ocz 600w as for rating i'll have to open to check i'm not home atm, but i am having someone look @ it soon. PS: trying some new drivers modified apparently that are made to fix my issues, i'll let you know how it goes! PS2: Good luck with the tournament!

Umm since i upgraded the bios i have a huge lag during games after a while, ping stays @ 20~40 ms while fps stays @ 125 fps but everything lags, for example i would run past a door only to find myself running in a wall way before that door, i don't know what caused this. it's really troublesome. ^^

Definitively will, as for the drivers the 266.58 are giving me a lot of issues. So i will roll back to the newest ones as they gave me better performance. I have very awkward lag while running around, i would see myself past a door and it would roll me back to the entrance, ping is @ 16 ms so i doubt it's a lag issue looked graphical. Also my loading times went up exponentially in black ops. Took me about 3 times the usual time it takes me to join a game. Rolling back to the latest update and will test again.

I havn't updated the bios in forever, so i will i was a few versions behind, as for my nvidia drivers 275.33 (The newest ones). So I'll roll back to 266.58 and let you know if i get any increase in fps. Also the lack of fps only happened in BC2 my computer does perform better for black ops. But not battlefield for some reason.

I feel that my pc was way faster when i was on my 9800 gtx xD it may be only an impression, but you are right since i'm at 3.6ghz everything seems at least back to normal, yet i can't play black ops on too good settings as i get good spikes, and bc2 is still super demanding for C2D processors, yet it ran flawlessly or so it felt with my 9800 gtx , but now with the 460GTX it feels a bit slower, also could it be because it's OC'Ed? It's a Gigabyte GeForce GTX 460 Fermi 760MHZ 1GB 3.6GHZ GDDR5 2XDVI Mini-HDMI PCI-E DX11 Video Card. I'll try 3.8ghz soon when i get my V8 coolermaster cpu cooler this week I achieved it on stock but i was reaching the 60 C mark I'm scared of heat

Thanks a lot sir! And thanks to everyone I feel that i have a very stable 3.6ghz but now i wanna try 3.8ghz on stock cooling I,ll let ya guys know if i have any questions! Thanks again! PS: i still feel my gtx 460 is bottlenecked by the cpu at 3.6ghz ;(

What temperatures are unsafe? Also it says 1.8v on my memory stick is that what i should set it to? (everest gives this info : DIMM1: Kingston 2G-UDIMM 2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz))

I meant the memory voltage Lol. What value should i set it to? Also should i try to achieve 3.8ghz knowing that i got a stable 3.6ghz @ 1.16v and 58 max temp? Ty for your answers!

Last question what do i put for V Ram most people told me to actually input it, does it really matter and if yes how much should i put it at?

I couldn't catch the sale for the h60 on NCIX, on a good note my system is very stable at 1.18v for 3.6ghz! So far i have my AI Overclock Tuner: Manual FSB Freq : 400 PCIE Freq : 100 FSB strap to NB: Auto Dram Freq: Auto Dram Timing Control: Auto Dram Static read control: Auto Dram Read Training: Auto MEM. OC charger: Auto Ai Clock Twister: auto Ai Transaction booster: Auto Cpu Voltage : 1.18125 FSB termination volt: Auto Memory Voltage : Auto ( It says 1.8v on my ram should i put it that?) NB Voltage : Auto SB Voltage: Auto Load-Line Calibration: Enabled CPU GTL Reference: Auto CPU spread Spectrum: Disabled PCIE spread Spectrum: Disabled CPU clock skew: Auto NB clock skew: Auto CPU Margin Enhancement: Optimized Anything i should change To improve my performance and reduce my cpu temp? atm i idle at 33 load @ 58 max!! thanks for the advices guys! Edit: I am also trying to lower the cpu voltage to 1.16v to see if it's gonna be stable is it a good idea? xD

Is a corsair H60 overkill? Because they are at just 50 bucks on NCIX xD

I checked and my PSU is an ocz