jxs9

It wasn't he video card but my Emerson TV. I originally thought it could be the video card. But it was the TV power supply board failing. I didn't know it was the TV until the more problems kept coming up until it completely failed later. I replaced the TV and now my circuit breaker doesn't go off. Those Emerson TV's use some really cheap Chinese junk. Those boards are well known to fail.

I figured it out. Turns out it was my TV causing the problems. Do not buy Emerson TV's. I had that less than a year.

Yea I think it could have been something else. But does this spike indicate anything wrong with the videocard?

I wake up my computer from hibernate and then a few minutes into using it the circuit break trips. According to my GPUZ log the videocard was pretty much showing the usual idle readings and then spikes within seconds to GPU load at 20% and VDDC Current [A] to 7.0 and VDDC [V] to 1.172 while all the other readings stayed the same. I wasn't running any videos,games,etc. Just chrome,firefox like usual,It has never happened before. I attached the log readings. GPU-Z Sensor Log.txt

I was able to pull out a usb wired keyboard. It seems to suffer the same issues. I wonder if it could be usb issues with the game.I have version 1.0.0.5 of dead rising apocalypse edition.I think that is the latest update so I don't know what's going on. I definitely don't have a ps/2 mouse/keyboard to try. I'm stuck at the part where you're in the diner and have to combine those two weapons. So I can't play the game any further until I can resolve this.

I have a logitech wireless mouse and keyboard. When I'm playing dead rising 3 apocalypse edition the mouse clicks and keyboard buttons keeps going in and out on screen. Like when I hold down the F for the inventory I can't keep it open. The inventory box keeps blinking in and out. And when I use the right mouse button to aim with crosshair it also keeps going in and out Is it a problem with the wireless or is it some bugs in the game? Anyone else have issues. I would try to test it with a wired keyboard and mouse but those are all in my storage buried somewhere.All my computers have wireless mouse and keyboard.

It stays around 60F-70F inside. Outside it stays around 30F-50F.. I used some arctic MX2(grain of rice method) that I had laying around, Idle temp stays around 30C-33C with fan at 25%. At full load(99%) it stayed in the 70's and the fan goes past 69% if you let it run long enough.

Okay,thanks

I have a sapphire 7970 OC with boost.I tested it with burn in and i went to 99% full load but the fan speed stayed at 69% and the temp maxed out at 71c before I ended it. How do you get the fan speed to increase?

Do I need to get the card heated up before i remove the cooler?

Just the fans.

Here are some.

I need to replace the dual x fans? Do you need to remove the entire cooler or just the shroud if you can? Any instructions?