hogtrader
Members-
Posts
6 -
Joined
-
Last visited
About hogtrader
- Birthday 06/12/1941
Profile Information
-
Gender
Male
hogtrader's Achievements
Newbie (1/14)
-
I just bought piece parts and built my own. Cost about $200 (US). I bought a pump, waterblock, radiator, fan and tubing to connect it all together. Check out this site. HighSpeed PC Hog
-
It appears to be my memory. I am able to run the processor at 11*200 stable if I lower the RAM clock to 166 MHz (83% of 200). I called Kingston and they think I may have an incompatible chipset on the DDR stick. I'm using KVR400X64C25/512. I have to contact them tomorrow (weekdays) and discuss options. One option is to exchange the stick for a different chipset. I'll keep you all in the loop. Thanks. Hog
-
Before you buy check out this site. http://www.highspeedpc.com/Merchant2/merch...ategory_Code=WC I'm using the "InnovaCOOL Rev3 Water Block". It mounts to the ZIF socket like the HSF did, Hog
-
Everyone is aware of VCool's ability to lower the CPU temperature of motherboards that use the VIA chipset. See VCool Site. My question is: "Is there a VCool equivalent for nVidia chipsets?" All replies appreciated... Hogtrader
-
Well Guys, My system won't start WinXP at 200*11 and 1.7Vcore. It goes directly back to POST. Do I need to do something with memory? Hog
-
I have an A7N8X, AMD Barton 2500+ (unlocked) and 512 PC3200 RAM. I am stuck at 180 MHz FSB and multiplier of 12.5x. If I go above that I get unstable and can't run. I saw others claim that they have exceeded 200 MHz and are rock-solid. Please tell me your setup secrets. Please post the BIOS settings for CPU, memory and voltages (and anything else I overlooked). Thanks for your help. Hogtrader