RealSlimShady

Everyone post their modded case so we can get ideas!

cool

how about the board and the cpu? if i bought both

how much for the motherboard?

I have made smoke effect before. You need to make about 10 frames or more to make it look real, and smooth. Just make smoke effect with the outline draw tool, then fill it in with gray color. just change it up 10times and it'll look like smoke

Yeah, WW3 I believe it.

yes that is good

well try 1.75 it may work and be stable, if not go up to 1.80

The lower the voltage the better but it has to be stable too. If you set it at 1.5 I think 1.75 should do fine. If not go up another notch.. until its stable

your mem should be able to do 150fsb. default 1.75core you should only increase the voltage when your pc doesnt boot or is unstable. If you trying to hit 1.4 you should set the core voltage to 1.80 prob make sure you have good cooling, keep an eye on the temps, more voltage = higher temps and more heat

strange, what voltage you running at?

check http://www.pricewatch.com for the cheapest prices on the Internet. As for the heatsink.. http://www.heatsinkfactory.com (Edited by RealSlimShady at 8:57 am on July 31, 2001)

How overclockable is the geforce3 leadtek?

replacing your power button on your case with a keylock?

hahahah