UberMario

Sorry, but i'm not a super-uber-pro in english i can't understand all... (french guy insiiide.... ) So, i don't got the redlines, (OcZ platinum Eb) but there are the same chips, i have reached 9*300 1:1 with these at 3-3-2-6... Is it that, you want to hear?

Hey man! Yes, flash your bios with merlin's bios, you got CE-6 chips, like me, and they are taking 300mhz actually @ 3-3-2-6 and 2.7v! Just copy these following settings, and try to o/c your ram! Command Per Clock Enable TCL-3.0 TRCD-03 TRAS-06 TRP-2 TRC-7 tRFC-13 TRRD-02 tWR-02 tWTR-01 TRWT-03 tREF-4708 tWCL-01 DRAM Bank Interleave-enabled DQS Skew Control - auto DQS Skew Value- 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 3 Max Async Latency- 8ns DRAM Response Time - Normal Read preamble Time- 5ns Idle Cycle Limit- 00clks Dyanamic Counter - Enable r/w Queue bypass: 16X Bypass Max - 07X 32 Byte Granularity - Auto And in the expert, set the ram voltage to 2.74, it should be 2.68v real. Try it, and good luck

Hello, i'm back! I have received my ocz platinum with ce-6 chips, and they're taking 300mhz rock'n roll stable @ 3-3-2-6 and just 2.7v!!!!!! Let's giv'em 3v for see.... ^^ Now i need an opty for replace my 4400, to take the 3ghz....

Hello! With these geil, i reached 350 @ 2.5-4-4-8 and 2.85v ! And it was full rockstable with merlin's bios! Good luck!!:cool:

I progress, I progress.... THANKS Merlin!!!!

Well done! My geil's tccd are taking 348 @ 3-4-4-11 and 2.8v!!! And its fully stable! Now, my 4400+ need to be more powerfull, i tired 5*348... I'll try 8or 9*348....

Well done!! With my geil tccd and your bios, they are takin 3-4-4-10 @ 330 mhz!!!! I try more now, and i try my corsair tccd later!

Try with 1/1 divider, you will win many perfs with it. My tccd can take 315 @ 2.5-3-3-8, and they're 3 years old !!!!!

Hello again, i would like to now, i was asynch, and every time, at 9* 8* or 6*... how to get the max fsb speed. The real max stable for the moment is 9*313-315, but i cannot go over. Shoul i need to give more voltage to the chip? And another question, why (at 1.56v) cant i go over than 11*240 (2600mhz)with a 4400+ step ccbwe, cause i can go up to 9*315 (2800mhz) with 1.45v? Should i need more voltage too?

Indeed

Good job! But with my corsair tccd (old of 2-3 years), they take 313 at 2.5-3-3-8 and 2.7-2.8v... Now with 4 tccd, i cant get high.... I try to sell it, but nobody wants!!!

It works fine by me.... But Merlin, can't you do anything for my 4*512 of tccd chips? I cannot sell them, and i can't go over 210 of fsb synchro.... Should it be other timings to modify? With just 2*512 i can go over 310-315 at 2.5-3-3-6... And i tryed also my max fsb, but at 9*315 it blocks, 8*315 too, 7*315 too (all asynch for beeing sure). Why is my fsb blocked there? Thanks for your help, and i'm sorry for my engish again!

That bios is so cool!!!! I'm now turning at 240*11, mem asynch at 206mhz 2-2-2-5 and all other timings full powa! With 4*512 of tccd and the odd divisor was a big problem for asynch.

Hum, g.skill m'ayant deja décu par le passé, je ne tenterais pas trop, le prix est interressant, mais si elle n'atteignent pas les 300 de bus, pour moi ce n'est pas tres interressant... Sinon, j'ai vu des ocz : http://www.aubonmicro.com/index.php?Choix=...ue-hardware.com Elles ont l'air paas mal; 2-2-2-5 oblige, donc a mon avis elles doivent monter assez haut... Sinon, aurais-tu mieux? sachant que mon budget ram est assez élevé (surtout si j'arrive a revendre les tccd ^^) Merci!

Ah, désolé, je viens de la faire mais elle n'apparait pas.... Et sinon, oui j'aimerais bien me prendre 2*1go (j'ai repéré un kit de xteam group http://www.openjl.fr/boutique/product_info...roducts_id=3582 ), mais j'arrive pas a vendre mes tccd.... J'ai payé 250€ pour les geil, si j'avais su....