Jump to content


J J

Member Since 13 Oct 2006
Offline Last Active Oct 13 2006 01:47 PM
-----

Posts I've Made

In Topic: 0x000000a5 why am i getting this?

13 October 2006 - 01:47 PM

ok im that case im sending this DFI trash back to newegg and getting a working mother board

In Topic: 0x000000a5 why am i getting this?

13 October 2006 - 01:42 PM

Hello,

http://www.newegg.co...N82E16817148022
Anything ASPIRE = Rubbish.

What memory do you have?
And is it in the orange slot(s)?


no its in the very first yellow slot and is aspire rubish because its actualy not designed well or rubish because it doesnt work well with DFI

In Topic: 0x000000a5 why am i getting this?

13 October 2006 - 01:38 PM

since im not sure what u mean amps on the 12v rail heres all the specs newegg has Model
Brand APEVIA (ASPIRE)
Model ATX-IB680W-GN
Series ICEBERG
SPEC
Type ATX12V/ EPS12V
Maximum Power 680W
Fans 2
PFC No
Main Connector 20+4-Pin
Dual +12V Yes
SLI Support Yes
Modular Cabling Support No
Power Good Signal 100-500ms
Hold-up Time >10ms at full load
Efficiency > 70%
Over Voltage Protection YES
Overload Protection YES
Input Voltage 115/230 V
Input Frequency Range 50/60 Hz
Input Current 10A @ 115V, 5A @ 230V
Output [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]
MTBF 100,000 Hours at full load
Approvals CB IEC 950, TUV EN 60950, UL 1950, CSA 950
Features
Connectors 1 x Main Connector (20+4 pin)
1 x 12V P4 / P8 (4/8 pin)
8 x Peripheral
4 x SATA
2 x Floppy
2 x PCI Express
Features High-tech aluminum casting with fire-resistant acrylic cover
LED light switch - Fan LED lights can be switched to blue, green or red
Multi-color coated components & PC board
Excellent Ventilation Design: 2 x 80 mm crystal LED fans
User-adjustable fan speed controller optimizing balance between noise reduction and necessary cooling
Cable Management: all cables are sleeved to avoid clutter and to improve airflow
UV Sensitive On/Off Power Switch, Power Plug and connectors
Short circuit / over voltage / over current protection
i cant get any other power supply to test it (meaning i wont buy another one) and if the mobos that picky about all this i should send it back

In Topic: 0x000000a5 why am i getting this?

13 October 2006 - 01:31 PM

i dont think that power supply is on the list but it has all the proper connections, all three power connectiors are connected. the ram is good cause i have ran mem test on it before for about 8 hours. i have a single stick of ram in it to rule out any problems with ram. the stick i have gets along with the mother board just fine too..