sic_vl2000

Hey got some Logitech X530's which are working with vista but I'm not getting proper 5.1 surround sound. Is there any driver in particular that I need to use for Vista or software. It worked fine with XP but since Vista no proper 5.1 :mad: Let me know any suggestions, I also have it cabled as apricot to centre input, black to rear and green to side

Anyone had problems with DFI Ultra D 939 mobo and sound drivers via windows updates, if I use iTunes it crashes causing a BSOD due to a audio driver?

Thats the prob though its around the mid 40's to low 50 at the moment and i want to find its limit, should i try a vcore of 1.45v and see how that goes?

Seems to be pretty rock stable as im using it at these specs at the moment 24/7 and its fine when gaming as well.

Hey guys i recently got a dual core x2 3800 since the price drops. The stepping of this little sucker is LDBFE 0614WPMW At the present moment i have it runing at 2.8ghz using 1.45vcore and its stable on both cores for at least 7hrs, the second core errors around this time but the main core i stopped after 13hrs. Now with this overclock the cpu was hovering around the mid 40degrees to 50 at times. I know i still havnt found the limit of this cpu so how can i go higher without having heat problems with the cpu?

Fairly certain its the line underneath the CABE etc

What week is your cpu etc as mine is CAB2E 0546 FPAW and cant get much over 2.7ghz

Hey guys is there any best bios for the Ultra D and Team Xtreem PC4000 UCCC 2gb kit, im using the 04/06/2006 bios at the moment

I would like to know as well i have been thinking of replacing my Arctic Cooler Freezer 64 for something better and can possibly cool the PWMIC while at it or ram

Ok i just got my PWMIC down to mid to high 40's instead of 54 what i done was grabbed a 80mm fan and its sitting on the IDE molex and IDE cable. This will only be a temp solution till i can find something more permanent

I know you have a different case but how did you mount the fan over the PWMIC?

Hey guys my PWMIC is hitting around 54 degrees when i run prime95 to stress the system what are some ways to get this cooler as my cpu only cracks 42 at the most and chipset sits on 40 degrees. This is with the cpu at 2.7ghz and using a divider of 166. Also while im at it i want to put something over the ram as well so i can try to oc them a bit further my case is a antec p150 if that helps

At what temp should i start to worry about the PWMIC as smartguardian is reading 53 54 degrees when i run prime 95, i really need to get some cooling on it somehow

Got them to 270 which was OCCT 30min stable, but i cant run a 1:1 divider on them though

THink the highest i have gotten OCCT stable and SuperPI is 265mhz kinda dissapointed though