malvare1

You are correct but it does not hurt to try and selling them asking high and see what I get. As far as your question is night and day from the 2 in sli to my xfx GTX xxx edition, now the GTS specially the 320 will not wipe the floor with the sli cards on 3d mark 06 is 1k point differences and you loose VIVO.

But you wont have VIVO with a gts, Maybe you should tell me how much should I sell them for or as a matter of fact I should just give them to you for free. I bet you that I will sell them on ebay for a lot more.

nope, each

better offer available

¤ How long have you had it ? 1 1/2 YEARS ¤ How do you plan on shipping it ? usps/fed ex/ups ¤ Why are you getting rid of it ? Just bought a XFX 8800 GTX XXX EDITION ¤ Is shipping included in your price? No ¤ Do you ship internationally ? Yes ¤ How do you accept payment ? I.E.. Money Order..Paypal..Certified Bank Checks. Paypal Pictures attached Cost 175.00usd each you can buy them separate or together is your call. Malvare1

thanks

As the tittle describes, Orthos does not fail, my systems freezes but only while running orthos, below are my settings any help would be appreciated, (TEMPS ARE BETWEEN 57C-63C UNDER orthos load) CPU VID Control................ - 1.52v bios (actual 1.48v) CPU VID Special Add............ - auto CPU Drive Strength............. - weak DRAM Drive Strength............ - weak DRAM Voltage Control........... - 1.90v (actual 1.82v) NB Voltage Control............. - 1.32v (actual 1.20v) SB Voltage Control............. - 1.52v (actual 1.45v) SB Dual Voltage................ - 1.52v LDT Voltage Control............ - 1.32v (actual 1.16v) CPU VTT 1.2V Voltage........... - 1.21v GTL REF Voltage Control........ - FSB & Frequency Seting: FSB-Memory Clock Mode.......... - Linked FSB-Memory Ratio............... - sync mode FSB (QDR), MHz................. - 1734 ===== PCI Bus, Slot 1 MHz............ - 100 PCI Bus, Slot 2 MHz............ - 100 SPP <-> MCP Ref Clock, MHz..... - auto LDT Frequency.................. - 5x CPU BSelect.................... - auto CPU Clock Ratio Unlock......... - enable CPU Clock Ratio................ - 9x CPU Feature: PPM Mode....................... - Native Mode Limit CPUID MaxVal............. - Disabled C1E Function................... - Disabled Execute Disable Bit............ - Enabled Virtualization Technology...... - Enabled Core Multi-Processing.......... - Enabled thanks

Why would one want to overclock the pci-e bus ?

Just got this rig and not much experience with ddr2 would anyone with similar setup or experience post their recommended settings on the below format please. I want to get the most out of them. my E6850 is orthos and 3dmark stable at 3700 mhz using the 9 multi but looking forward to 3800 with max memory performance. Please take a look at my settings and make recommendations my temps are around 47-53 under orthos thanks CPU VID Control................ - 1.35V CPU VID Special Add............ - 101.55% CPU Drive Strength............. - Weak DRAM Drive Strength............ - Strong DRAM Voltage Control........... - 2.20V NB Voltage Control............. - 1.57V SB Voltage Control............. - 1.62V SB Dual Voltage................ - 1.52V LDT Voltage Control............ - 1.22V CPU VTT 1.2V Voltage........... - 1.21V GTL REF Voltage Control........ - Disable FSB & Frequency Seting: FSB-Memory Clock Mode.......... - Linked FSB-Memory Ratio............... - 3:2 FSB (QDR), MHz................. - 1645 ===== PCI Bus, Slot 1 MHz............ - 120 PCI Bus, Slot 2 MHz............ - 120 SPP <-> MCP Ref Clock, MHz..... - 300 LDT Frequency.................. - 5x CPU BSelect.................... - Auto CPU Clock Ratio Unlock......... - Enabled CPU Clock Ratio................ - 9x CPU Feature: PPM Mode....................... - Native Mode Limit CPUID MaxVal............. - Disabled C1E Function................... - Disabled Execute Disable Bit............ - Enabled Virtualization Technology...... - Enabled Core Multi-Processing.......... - Enabled Memory Timing Setting: Memory Timing Setting.......... - optimal CAS Latency Control (TCL)...... - 5 RAS# to CAS# Delay (TRCD)...... - 5 Row Precharge Time (TRP)....... - 7 Min RAS# Active Time (TRAS).... - 25 Command Per Clock (CMD)........ - 2T ===== Bank To Bank CMD (TRRD)........ - 5 Row Cycle Time (TRC)........... - 32 Write Recovery (TWR)........... - 6 Write -Read Commad............. - 11 DRAM Refresh Rate.............. - 7.8uS

Hello guys I should receive my new rig parts by friday mainboard: DFI 680i LT T2R CPU: E6850 HSF: TR 120 EXTREME Memory: Ballisticx pc8500 (non tracers) Power Supply: PCP&C SILENCER® 750 QUAD VIDEO: 2X BFG 7800 GT OC SLI <---Already had from my current rig Sound: SB AUDIGY 2 Gamers <--- already had Could anyone offer me some advice, tips, tricks or must do before booting? been new to overclocking intel I'm kind of lost, been reading 3 days straight but since the cpu is brand new, I have not seen the mb/cpu combo on any reviews or forums. Any help would be greatly appreciated. Malvare1

Ok guys sorry about the multiple accounts I will keep malvare1 instead of hlonipha, I could not remember my old login and created a new one. So I will maje the same thread with my good login name malvare1.

Never use a 1/2 multy, use 8,9,10,11 not 9.5,8.5 etc etc.

Crank it

Ok now I'm not freezing, here is a screen shot now I'm going to run p95 and if it does not freezes or crap out in a few minutes then I will try to run a 3d bench, but with this much voltage a little afraid of temps UPDATE P95 fails core 0 in 12 sec core 1 keeps going, I up the vcore up to bios 1.62 and nothing. I going to start backing down to see what is the highest I can do. stable.

what is the 32 bites granularity and is my setting disable 4 burst ok ?