ubertas

I am suffing from information overload can you pls fill in the blanks for a decent OC with my rig. TY much :nod: Genie BIOS Settings: FSB Bus Frequency - LDT/FSB Frequency Ration - CPU/FSB Frequency Ratio - PCI eXpress Frequency - CPU VID StartUp Value - CPU VID Control - CPU VID Special Control - Avove VID * LDT Voltage Control - Chip Set Voltage Control - DRAM Voltage Control - DRAM Configuration Settings: DRAM Frequency Set - Command Per Clock (CPC) - CAS Latency Control (Tcl) - RAS# to CAS# delay (Trcd) - Min RAS# active time (Tras) - Row precharge time (Trp) - Row Cycle time (Trc) - Row refresh cyc time (Trfc) - Row to Row delay (Trrd) - Write recovery time (Twr) - Write to Read delay (Twtr) - Read to Write delay (Trwt) - Refresh Period (Tref) - Write CAS Latency (Twcl) - DRAM Bank Interleave - DQS Skew Control - DQS Skew Value - DRAM Drive Strength - DRAM Data Drive Strength - Max Async Latency - Read Preamble Time - IdleCycle Limit - Dynamic Counter - R/W Queue Bypass - Bypass Max - 32 Byte Granularity -

Why my the Storage drive in my sig shows in windows as a 120g?

I am a newb to all this and built the setup in my sig this week. At the moment I am running a single VGA card because I just cant seem to get a stable system. I had it pass all tests mem/prime etc. I downloaded and changed bios around tried the OCZtony versions and the 623's I was running fine with the bios in my sig and it seemd to be the most stable. Then I installed the new evga drivers from thier site... I think like 81-05 or something. Everything seemed fine until I installed the following. Avast and BF2, after avast all was good but then in BF2 it wouldnt load just sat at the connecting to server screen. I uninstalled bf2 and avast and lost my cable modem somehow in the process, a linksys all in one type. I reformated, cleared bios and will re test tonight. any suggestions especially for setting in bios for my build?

Ok so I ordered my 2nd 7800 gtx by evga today and want to know if there are any tips you can give for setup? Im a newb with sli so pls dont think I know anything at all lol. Rigs in the sig

Thx alot exactly the answers I was hoping for. The instal went smooth except for using to much thermal and had to take it off and re-apply the correct amount, man what a mess that was but it seems I didn't damage anything rofl fn newb.

Hello all Newb here, I just did my fisrt DFI build, case mods etc. Everything went great so far although I have not instaaled the OS yet, I will do this this evening after I get a couple questions cleared up. My rig is the sig the Bios is what I am thinking of running everything else is in, Initial boot is done and Memtest ran all night with no errors. Her comes the questions. 1. As I am still running the stock bios is ther a ongoing issue with the Date/Time adjustment? I cannot for the life of me figure out how to set it as it is reading Jan 3 2005 and wrong time and can't seem to change this setting in the Bios options it just tabs around not letting me set it any different. When I add the new Bios will this be fixed? 2. Is the Bios in my sig a good recommendation with my setupo or if not what should I get? 3. Do you think my PSU will support SLI 7800 gtx evgas? 4. Anyone have any suggestions as to a good water setup for this rig? Well thats about it, this forum helped me alot and thx for that, I am happy with everything and will be water cooling it at xmas.

May sound silly but did ya enable SLI in Bios?