Prisoner.88

If you will Choose ATI 9800Pro 256MB you can flash it to 9800XT (as you did) But it will never be better Than 6600GT I Say 6600GT and leave 6600Nu because you may also going to bad sad somtimes with 6600GT Personaly i will choose 6600 than 9800Pro 128mb for gaming and 9800Pro 128 for video edition because it has higher bandwith than 6600

You have to press F6 at first screen when your CD Boot UP to install your Sata Drivers, If you have done that you maybe choosed the wrong drivers or maybe you need to download The latest Sata drivers from DFI Site

Good Stepping allow you to use low voltage I have seen some people reached 3GHZ With less than 1.5V My CPU and it's bad stepping(IW) Likes to eat much voltage , I used 1.60 to reach 2.6G I tried lower voltage but it was not stable so I Set Vcore at 1.60V , I think i will need 1.8v to reach 3G then I will lost mine cpu directly

I Have no problem at all while Overclocking Even with 3.6V when I was testing BH5 MEM STICK

It's Great PSU I don't know why some people hates this PSU !!!

i decided to download another copy because mine is 1 year old

maybe mine cds is not bootable i will check the windows xp startup disk

same problem also without raid

Hi I Have WindowsXP64Bit (Copy) and Windows 2003 64Bit ( ISO From Microsoft Downloads) when it starts booting a message come to me says (NTDLR) is missing WindowsXP64 is a copy so it maybe corrupt but windows 2003 64 is iso version downloaded directly from microsoft and i didn't edit it !! so i think it mobo problem or somthing like that!! What do you think guys how can i slove this problem ?

Problem Fixed after flashing to 623-3 also system became stable when using 2&4 Dimm Thanks

Sure I will do that Thank you I prefer to try the Offical Bios Thanks

4 power connectors were plugged the stock memory timings is 3-3-3-8 and i've this problem before even changing memory timings to 2.5-2-2-4

Hi I'VE a problem with memory warning message at system startup it says (Please Install One ram module in Dimm 2 for single channel operation and 2 modules in Dimm 2&4 for dual channel operation ) OK Now i'm running Dual Channel using 1&3 DIMM but when i install them in 2&4 Dimm i never saw this message again but my system was not stable at all when i load prime it stops after less than one minute even at defaults setting , then i install them again on 1&3 Dimm and now my system is stable What should i do now with this warning

Thanks all sorry for my bad english

Hi i just like to know if i need to plugin the HDD , FDD Cables on mobo ( first time i see mobo need that kind of power before) and what are they for? need answer soon