Enthusiast

G-Skill...

9.35 HERE. No problems at all. (over 10 hour`s of use daily) No RAID in use. Used since July & and a friend of mine is also using the same set.

From: here (its confusing page, SUB MENUS BELOW THE PAGE) 1GB/2GB -------------------------------------------------------------- F1-4000USU2-HZ Picture click Flavor 1x 1024MB / 2x 1024MB Rated speed 500MHz Latency Timings 3-4-4-8 Operation Voltage 2.6 ~ 2.8v Chip IC Samsung UCCC PCB B6U808 v1.1 Warranty Lifetime Market segment* *** OC potential** ** Reviews/Testreports: Guess2098 Testreport Kakaroto Testreport G.S Technician Testreport bachus_anonym Testreport

Meaning What Memory? It`s All there what Gskill has to offer.. (Allmost) (There are SUB MENUS BELOW....)

OVERCLOCKING (review) DATABASE FOR Gskill memory: (its up again) http://www.xs4all.nl/%7Efamchow/Gskill/Gskill%20list.htm

OVERCLOCKING DATABASE FOR Gskill memory: (its up again) http://www.xs4all.nl/~famchow/Gskill/Gskill%20list.htm

Hi! Thanks, yes i have earlier tryed 9x300, but no Go... Continous rebooting at 300fsb.. I have maybe tomorrow time to test again... So will see if any helps...

Never given 1,7 to GPU... I just realized that i allways have FastWrite on....

U should surf days in these forums before u know whats going on in these forums...

DFI LANParty UT nF3 250Gb (6/23 BIOS) AMD Athlon64 3000+ Venice Rev. E6 2x1024MB G.Skill ZX F1-3200PHU2-2GBZX Club3D X800Pro @ 540/530 (Mod16P), ATI Silencer 4 80GB Seagate SATA RAID, Maxtor9 PATA RAID NEC 2510 DVD Writer Antec Neo Power 480W CoolerMaster AquaGate 120 ================================================== ============ Genie BIOS Settings: FSB Bus Frequency - 270 AGP Bus Frequency - 69mhz Clock Spread Spectrum - Disabled LDT Downstream Width - Auto LDT Upstream Width - Auto LDT/FSB Frequency - X 3 CPU/FSB Frequency Ratio - X 10 K8 Cool 'n' Quiet Support - Disabled CPU VID Control - 1.50v CPU VID Special Control - Above VID * 113% Chip Set Voltage Control - 1.80v AGP Voltage Control - 1.60v DRAM Voltage Control - 2.90v FastWrite - Enabled THESE SETTINGS ARE PRIME STABLE IN DOS MODE (PRIME ONLY) Maybe my GraphicsCard jams, because i see corrupted textures... (this happends when started BurnIn test from a bootable win cd)

uninstall use after that drivercleaner pro: http://downloads.guru3d.com/download.php?det=745 reboot and install new set

E3 venice 3000, 10xstock multi Gskill mem MAX oc 216MHZ Aim ex. 2,7GHz or (2,8) FSB stability needed.. 260x10, mem @ 5/6 ~216MHz = stable, AGP 69-79 2,7 was yesterday stable in prime (booting cd) but NO go in windows

I have used these 3 months The raid tool that u see in the windows doesnt install, but everything works fine. harddrive 135 Mbits/s... DO NOT INSTALL THE nVIDIA FIREWALL (save u from trouble)

Use these moded drivers <-- there is a forum link too.. AND DO NOT INSTALL THE NVIDIA FIREWALL (its not working for anyone..) I have been using these from the release. No problems at all so far.. 3 months..

Any way to get around this? And i just dont get figured out my mem..? What ever "LOOSE" timings i try.. I get a total red line of errors in memtest 1.55 in the end of test 5.. Must be something with the mobo.. The rev. is A1 the first i think... Stockcooled mb... CASECOOLERS: 80mm on memory 120mm intake fan (aimed to mb chip&GPU) 120mm CPU/CASE fan (100CFM=100% & 100db sound :nod:) 120mm PSU fan Mb 40~50c cpu 37~42c