kubalik

I know there should be a sticky post about it but i cant find , can someone post a link to it or just simply answer me ? i got the ocz vx sticks for better OC orange or yellow ? Thank you

Hi all i just want to ask where do you think i should connect the 3rd hard drive this one is supposed to be hidden partition with back up of my system . The other 2 drives are connected in raid 0 on nvidia controller . should i use nvidia controller or silicon image controller ? thx for any suggestions

well still no luck i added a fan to cool the hot spot ( u can touch it easy now ) even tho the case came with 4 bulit in (quantum case) i burned the memory at test 5 at 1.5 3 3 7 settings and when dropped any of the settings to 2 had 1000s of errors ... any sugestions ?

i tried settings starting from 3.1 to 3.5 i got best results on 3.2 v actually most of my erros come in test 5 , today i am gonna put a fan thats gonna blow on that hot spot by the 3.2v-4v jumper see if that helps any ...

Well i tried lots of different settings and i have to have trcd and trp values set at 3 in order to run memtest without errors good thing is i went up to 240 mhz and they still holding up , with the cas at 1.5 and tras at 7 it isnt too bad but it should be better dont u think ?

Thx a lot Ryder , This is exactly what i was was looking for Lets see if it works out for me Thx again

Hello ! Anyone else having problems with the ocz VX ( ddr3200) >? i always have errors in memtest no matter what settings i use . Even when i put everything on AUTO i still get errors not as many as when i had it set manually but still there is some ! Anyone else have that memory ? can u plz list your settings ? Thx

Ultra X-Connect 500 20 pin connector

Btw if u remember my previous post /problem dual channel not working i found the problem . it s a strange one , one of the processors legs was bent and shorted to another one . Thx god it didnt brake when i straighten it out .now its working perfect after little overclock 240 fsb i got above 7k in sandra memory bandwith test

Hello I was wondering if any of u know if i take the raid drives ( raid 0 ) off nvidia controller (with installed windows on the drives ) and connect the same drives to silicon controller if the windows is still going to work ? Also tell me which controller do u think is better one . I personally dont like nvidia one cuz in windows on the task bar it lets me safely remove them !$! or maybe there is a way around it ? Thx for any sugestions.

yes of course sorry i didnt mention, the sticks i used are maching 2x512 of corsair , that didnt work so i bought new 2x512 OCZ but they dont work neither

Hello everyone ! My problem is dual channel on DFI nf4 sli dr Got two different sets of memory one is corsair xms 3200 xl other is ocz 3200 el vx none of them work in dual channel with settings as posted by Rgone . What now ? rma the board ? funny thing i have asus sli board too and have same problem with it wont work in dual channel neither , thats why i am so upset , did i have such a bad luck and got two boards in a row tha were faulty ?