AuX
Members-
Posts
34 -
Joined
-
Last visited
AuX's Achievements
Newbie (1/14)
-
this with the newest bios? if not flash to 310
-
Venice and the DFI Ultra D
AuX replied to chunkylover77's topic in Processors, Motherboards and Memory
I'm not sure but I would say you would need the newest bios. -
Well I know of a pci-e lan card think its out now or soon to be released.
-
NF4 SLi-DR: DRAM Voltages stuck at 2.6V
AuX replied to |Tommy|'s topic in Processors, Motherboards and Memory
Are yes I had that as well, just flash to the newest bios it fixes it -
I noticed a while ago in the device manager that this mobo says there is a Built-in Infrared Device. I didn't know this mobo had this. :confused: Don't know if I will ever use it but may come in handy one day.
-
What power supply do you have? (open to all platforms)
AuX replied to Angry_Games's topic in OCC Member's Lounge
My Antec Neo power 480 seem to be doing a good job -
I should have put lapp the sb heatsink, don't think I would try to lapp the chipset
-
wont void the warranty Well if I have to pull my set up down some time I will lapp the sb and use AS5 on it
-
Hmm well don’t want to void the warranty just yet and I would have to pull the pc down again so I will leave it I guess.
-
my bad I found the info so I'm happy although I am running those temps AG says the chipset can go to 60c and be fine and pwmic to 120c so Im ok still would have like my temps lower but not a lot I can do I guess.
-
Ok whats is the max temp for the PWMIC and the CHIPSET ? both get up to 51c some times and in smartguardian the read out on them goes from green to red. think there getting so warm because of the video card here's some pic's form when I did some testing. http://img72.exs.cx/img72/9812/10005518yp.jpg http://img45.exs.cx/img45/9151/10005509zk.jpg http://img7.exs.cx/img7/899/10005495ji.jpg
-
nf4 ultra: diag. LEDs on in windows
AuX replied to plax3's topic in Processors, Motherboards and Memory
Not sure what it means but no thats not normal. -
I'm not have any issues at all with the onboard lan
-
I/O Sheild Not matching with rear I/O Ports
AuX replied to J Nice's topic in Processors, Motherboards and Memory
there not too bad, still seems about the same as my antec I had with 4 80mm in it.