Jump to content

Concepted

Members
  • Posts

    8
  • Joined

  • Last visited

Concepted's Achievements

Newbie

Newbie (1/14)

  1. I'm also seeing CPU-Z saying that my board is in 8x mode. I don't have it set to SLi mode on the board(I'm running an expert) and I do believe it's hendering my performance. Is there a jumper on the board I can check? Because I'm tired of having a $600 VC that isn't working the way it is supposed to. J (Sorry for thread hijacking)
  2. I've recently been running a single stick of PC3200 TwinMOS ram in my NF4 Ultra in the 2nd slot. ( Orange one closest to the edge of the board.) Today I went and bought a new Dual channel set of ram. (1 Gig of OCZ PC3200) I installed it, cleared the CMOS, and it wouldn't boot. So I tired one stick at a time, and came to the conclusion that it only works in slot 2. I'm pretty sure all three slots aren't bad because I oringally was running a Gig of the TwinMOS ram in it. Any help would be appriciated.
  3. Yeah, I was going to get a 3200 but I decided to hold off and just get a Venice core later on for my board, so I went with the cheaper option.
  4. Yup, tried upping the vcore, but then my pc wouldn't boot, so I returned the psu, and got the 600w and it boots fine now with the upped vcore, but I think my oc is done at 282FSB... though, I wonder if my ram could be holding me back as I've only tweaked it to be 2-2-2-9, and have no idea what any of the others are... guess I gotta find me a good ram guide.
  5. Ultra 600w +5v@28a || +3.3v@28a || +12v@29a Seems to do alright, thinking about going to the Skyhawk 570Watt or 620Watt depending on if the 620 carries double +12v rails... which, I'm going to look up right now.
  6. OKay, so first I'll lay out my system then explain what's up. AMD A64 3000+ CBBHD 0447 @ 2475 - 1.440vs DFI Lanparty UT NF4 Ultra(SLi modded w/ 3-10Bios) 512MB DDR TwinMOS w/ Winbond UTT 50D ICs OC'd to 2-2-2-9 @ 247Mhz And if the VC matters it's a POS 9200SE PCI till I get my 6800GT Okay, so the question is, why have I hit a walll this low? I've got the FSB at 275 with a x9 multi.... I was under the impression that it'd do a bit better, lookin for atleast like 2.5Ghz, oh... this is all on Stock cooling, load looks to be about 47c. Thanks for the help everyone...
  7. Not sure if any of you have read this forum yet, but it's got a LOT of info on the TwinMOS TMII and Speedstream versions both. http://forums.extremeoverclocking.com/show...ad.php?t=154258 Pretty much everyone there is getting 250+ without having to boost up over 3.3 vdimm.
  8. Semi new to the world of overclocking, and new to these forums. So, I just bought this board, kind of on accident, as I was flipping through the Zipzoomfly pages to see which was going to be best bang for the dolla, meant to get the Infinity. Anyways, I need to get the damn thing to run higher volts through my ram, cause they don't start perking up until they are hit with 3.3v.... does anyone have any idea if there is a BIOS that will do this or am I going to need to have a hard mod done? Thanks for the help in advance. J
×
×
  • Create New...