Jump to content


thefake007

Member Since 21 Jun 2004
Offline Last Active Feb 21 2006 03:46 PM
-----

Topics I've Started

Lanparty Ultra B won't boot

15 June 2005 - 07:36 AM

Hello everyone.

I have been running fine on the 6/19 bios for about a year until last night. I tried to cold boot my computer and I didn't get anything on the screen at all. The CDROM drives both blink repeatedly, and the HD light is on. The HD light turns off after about 2-3 minutes.

For the LED code, I get 1&2, then 3, then 4, and then it repeats again, in an endless cycle.

Also, I have already hot-flashed the bios with my infinity and I still get the same deal. Anyone have any ideas? I recall from when I read the forum last year that some people held down keys on the keyboard to get passed the cold boot problem?

Thanks in advance.

moral of the story, NEVER use winflash

07 August 2004 - 04:49 AM

Switched from a finity to a lanparty ultra b yesterday. Switch went fine. Decided to flash the bios this morning. Got lazy, used winflash. It said it flashed properly... lies. 4 leds of death. :( pulled out finity, cpu of another system, and ram from another system. Cracked the bios socket for the lanparty (only plastic corner) hot flashed (surprisingly, I was calm?) Success. Moral of the story, never use winflash. I wanted to save the two minutes in creating a bootable floppy, instead I wasted an hour. :( First hotflash though! Complete success, minus the whole cracking the corner. :o

max nb temp?

12 July 2004 - 05:16 AM

how hot is too hot for the nb?

Voltage to chipset?

09 July 2004 - 06:48 AM

Whats a good VDD? I have mine set to 1.7v, but does anything higher yield more stability? Please list your FSB, mhz and what your chipset voltage is at. Thanks. Also, is it safe to go higher than 1.7 with stock cooler? I did get rid of the stock thermal grease and used type44.

Lanparty round cables

02 July 2004 - 10:09 AM

How many round cables come w/ the DFI Lanparty Ultra b? Some reviews show 3, and some only 2.