AsAs1n8eR

I modded it and it worked for me until i did something stupid Now it's back to Ultra.

I have the same problem.I don't know what's the problem but the max I can get is 2.78G and this with 1.7v.Hell I even tried 1.9 volts still no going over this.maybe you should post your stepping.Is it made in China?

Yes good review I read that as well.

Won't the memory be independent?So I wont raise the ram when I overclock the CPU?How will this independence be defined?Will I have a divider that is automatically set by the chipset and is balanced between the cpu speed and ram speed or will this be a link or smthn?

You could decrease the multiplier and pump some more HTT you could decrease to 10X.And increase the voltage from the CPU to 1.6 and the chipset to 1.6v.Waht stepping do you have.From what I see yours has the same simptoms as mine.Mine does something like that as well.

If you are looking for gaming performance you should get the best of 1T.The best thong to find out is to search for the highest 1T frequecny with the smallest latencies and then the same with 2T and do some tests.3Dmark or something.

I get the problem you describe when I overclock the CPU and it shows that it's unstable after 4 hours or so.Maybe the 2nd core isn't that stable as the 1st.

As you wish but I don't think it will work.Eventually if you would manage to use a 5.1 configuration and set the rear or something to line out.But if you are using 5.1 speakers that won't work.And I don't think there is an option in winamp or in a game that allows you to choose the channel where you sound should come to you only the soundcard.

Whats the amount of emmory he has?Is it 1GB or 2GB?

What does line in and mic-out have to do with line-out?The most simple solution is to get another soundcard.But try it out before since a friend of mine tried this on a Gigabyte and the onboard didn't work.That was because he had only auto so when the BIOS detected a soundcard it automatically disabled the onboard one.But try it out with a cheap one or one you have laying around before you call it quits.

I didn't see any diffrence abck when I was using my nf3 DFI.

So please detail..You ahd it on the NON SLi position and it works like 8x?Right?If so there is something weird there.

Yeah I have that stuff as well it's the speaker.Anywayz why thoose long beeps happen when overclock fails?

It all depends how you are runnin' it.If you are set to SLI then it will run on 2x8X (even if one card is inserted) but if you are running only one card then it's 16X

Well I can say I'm very disapointed.Everyone could burn it up.After all this talking here you could had at least done something more sado to it.