grahamdunstan
Members-
Posts
74 -
Joined
-
Last visited
OCC
-
Computer Specs
Asus Striker Extreem
Q6600
2X1 GB Corsair XMS 2 6400 4-4-4-12
Kingwin 700w Psu 4X12v rails
2X Asus 8800gtx In Sli
Antec P-182 SE Case
250gb X2 Sata in Raid 0
Windows Vista 32
grahamdunstan's Achievements
Newbie (1/14)
-
Dominator quad 5-5-5-15 @1066 Help
grahamdunstan replied to grahamdunstan's topic in Processors, Motherboards and Memory
Hi guys thanks for your help i have now got my ram running at 1.2Ghz 1205mhz 2.2v @5-5-5-15- TRC-22 i found if i went to 23 it would not boot after 1000mhz bringing it down to 22 has made loads of diffrence. However i seem to have hit a wall now at 1205Mhz if i was to set the RFC-RRD-WR-WTR-RTP would i be able to get it to run even faster again ? Iam so glad that it was not going to be an RMA. -
Dominator quad 5-5-5-15 @1066 Help
grahamdunstan replied to grahamdunstan's topic in Processors, Motherboards and Memory
ok i will try both these things that you have said iam unable to test untill thursday so i will let you know waht happens. thanks for the help . PS what about the voltage on these should i keep them at the rated vplts or when overclocking them is it safe to put it up abit say 2.3? -
Hi there ih have 4GB quad kit Dominator - 8500C5DF G @1066 5-5-5-15 . my cpu Q6600 OC to 3.48 QDR 1500 MOBO asus striker extreme Bios 1305 what i would like to know is the best settings for ths ram all i seem to be able to get is 5-5-5-15 2T trc 18 @800 2.225v if i put the voltage to 2.2 the computer gets the BOSD just B4 it goes onto the desktop and thats the mem @700mhz what voltage can these dim's take would i be safe to put up the voltage more to try for faster speeds or could that fry them. i would like to even get 1000mhz with 4-4-4-12 all help very much welcome . Thank you in advance. http://www.corsairmemory.com/products/dominator.aspx
-
Hi there i am thin thinking about taking the heatsink of my 8800gtx's and using artic silver5 5 on there do you think that i will see much diffrence in temps or could i just be wasting my time and also if anyone has done this could you give me some tips thanks
-
thats great thats for your help iam going to go and mess about with it now
-
is 1.65 not pushing it to much ?
-
is 1.65 not pushing it to much ?
-
hi iam using the thermalright 120 ultra my temps are 38 idle and about 58 load ?
-
yeah the mobo will let me put it up to 1.9v but i have had it upto 1.5v but still the same thing happens and dose not boot ?
-
please can someone help me Iam now stable @ 3.5 vcore - 1.4250 mem -2.2 1.2 ht - 1.5 NB - 1.55 SB - 1.55 Cpu vtt - 1.55 qdr 1558 ddr 800mhz @ 4-4-4-12 - corsair dominotor 4GB every time i try 3.6 it will not boot at all then when i reset it it says the has been a hardware fault and to press f1 to contuine or del to enter setup. if i p[ress f1 it boots and normal speed of 2.4. PLEASE HELP
-
ok i have been able to get it up to 3.5Ghz but now iam really stuck there my volts are FSB (QDR), Mhz: 1559 Vcore Voltage: from 1.4 Memory Voltage: 2.1 1.2v HT Voltage: 1.3 NB Core Voltage: 1.50 SB Core Voltage:1.55 CPU VTT Voltage: 1.55 i have bee trying to get the QDR to 1600 to give me an even 50% overclock but every time it just will not boot i have tried upping the volts but still no joy Please can you help Me
-
hi there done what you had said there in the system32/drivers/ext folder added the ip and site name but when i went to save it it would not let me ??
-
this it it here i can can log on to via a web page www.frequencycast.co.uk/homehub.html
-
Hi there iam using a bt home hub can i do it on that ?
-
Hi there i was wanting to know of the best way to block a web site in windows i would rather not use third party software and i dont want to set up user accounts on my computer is there any other way to ban web sites thanks ?