Jump to content

D-BEAR

Members
  • Posts

    29
  • Joined

  • Last visited

OCC

  • Computer Specs
    17IN TFT
    THERMALTALKE SOPRANO
    AEROCOOL 550W PSU
    3000+ VENICE+FREEZER64
    MSI NEO2 PLAT
    2X256 G-SKILL
    X800PRO 16PIPE GIGABYTE
    AEROCOOL AEROGATE
    LG 4163B
    PIONEER 109 LTD ED

D-BEAR's Achievements

Newbie

Newbie (1/14)

  1. opteron 165 @ 2.95 air 7900gt sli 650/1650 air score=125,657 GFX 23,397 CPU 13.570
  2. Here's my 2 xfx 7900gt's....first one has green pcb and is the 470mhz one...v.1.0 date 02/06 code UDFR...Second card black pcb same 470mhz v.A.0 code UCF7 date 04/06.
  3. What make were your's.....my 2 XFX's work fine... one with green pcb and the other black.
  4. Hello....another user of the NV6 here....don't know who sussed it out first but i got my info from xs as i was looking for another cooler for my sli as 2 vf900's will nor fit on a dfi-ultra.....all i had to do was file one of the thumb screws down a bit and now works a treat....and i must say performs well. :nod: Edit: Here's a pic...as you can see thumb screws on zalman would get in the way.....on the NV6 only the one in the front needs to be filed down a bit.
  5. Hi guys....been doing a bit of benching with my 7900gt's....here's what i got to far....cpu @ 2.8....XFX 7900 gt's @ 600/1644. 3dmark 01: 39.209 3dmark 03: 35,127 3dmark 05: 14.926 3dmark 06: 9,318 Only got to do 1 run of 03...tryed to submit...said i needed update , installed..... from then on i get crash saying corrupt...uninstalled reinstalled + update....still corrupt....anyone now how i can solve this corruption without wiping o/s.
  6. My sli bridge is an ABIT got it off ebay for 55p + p+p...what a bargian.
  7. Hi richiec77.....i can run it higher but i do only for benching up to 2.85 '@ around 1.52....but not sure what are decent temps for one of these that's why i run as low as possible @ 2.6ghz temps are 30-40 @ 2.8ghz it gets to low 50's @ full load on air....so not to sure if it's to high at that temp....i seen on another forum a guy claiming their good up to 65c full load....so it's who to believe.
  8. Cheers Crag-Hack....Here's my fisrt run with 7900gt's 1.3v @ 600/1644 3DMark06.
  9. Hi Oceanborn....many say to avoid this stepping.....but in my case i wouldn't swap it for anything....well maybe a 170 that does 2.8 @ stock v's.
  10. Hi there...no i think it's a good strong +12v rail....my new epsilon which i put in today says 12.27 in mbm and 12.15 in bios...when i checked with mm i found mbm to be more correct...my actual reading was 12.33....and no it is not a problem.
  11. Here's my CCBWE 0551 UPMW this was only to see if it would hit 3g only and did not push any furher as on air.
  12. Sorry i meant 113k @ stock.....will be clocking tommorow when new psu arives. Edit: got it up to 121k so far.
  13. My chip is mighty fine...same stepping...i run it 24/7 @ 2.6ghz for low v's...i have benched up to 2850ghz 1.5v....and i got a screenshot of 3ghz @ 1.58v all with a Zalman CNPS9500.....NOTHING IS GUARANTEED your either lucky or you ain't.
  14. XFX 7900gt vmod 3DMark05=11.7k 3DMark06=6.7k
  15. Now got my SLI setup....with standard 2x 7900gt's @ stock cpu @2.6ghz i get a score of 112k....does this sound Ok.
×
×
  • Create New...