jbuckley21 Posted August 4, 2005 Posted August 4, 2005 No matter what I try I cannot get my FSB higher than 247. As soon as I step into 250 range she blue screens right after windows starts to luanch. I have the following settings: FSB 245 LDT 2.5 Multi 10 (high as it goes) Tried with 9 and will only post upto 252 (which is like 2.2 and change) Vcore 1.55 (1.3 * 123%) LDT 1.3 Chip set 1.6 Dram 3 (blue screen issues below 3 at stock) and memory timed at 1/01. Anyone have any suggestions for getting me north of 2.449 or 250 on the fsb? Only current one going is scrap the x-connect 500 psu, but hesistant to lose the mula. Quote Share this post Link to post Share on other sites More sharing options...
noktekniq Posted August 4, 2005 Posted August 4, 2005 hmm i got mine to go up to 2.6. and u got better ram then me.! u can try this... see if it works... Genie Bios Configuration FSB Bus Frequency 250 LDT/FSB Frequency Ratio X 3.0 LDT Bus Transfer Width 16 16 CPU/FSB Frequency Ratio X 10.0 PCI-Express Frequency 100mhz K8 Cool 'n' Quiet Support Disabled CPU VID Startup Voltage Control Auto CPU VID Control 1.450v CPU VID Special Control 1.275v LDT Voltage Control Above VID * 133% Chipset Voltage Control 1.30v DRAM Voltage Control 1.60v DRAM+.03 Voltage Control 2.70v Dram Configuration in Genie Bios Dram Frequency Set(Mhz) 180 (DRAM/FSB : 9/10) Command Per Clock(CPC) Enable CAS Latency Control(tCL) 2.5 RAS# to CAS# Delay(tRCD) 04 Min RAS# Active Timing(tRAS) 07 Row Precharge Timing(tRP) 04 Row Cycle Time(tRC) 07 Row Refresh Cycle Time(tRFC) 16 Row to Row Delay (tRRD) 03 Write Recovery Time(tWR) 03 Write to Read Delay(tWTR) 02 Read to Write Delay(tRTW) 02 Refresh Period(tREF) Auto Write CAS# Latency(tWCL) Auto DRAM Bank Interleave Enable DQS Skew Control Auto DQS Skew Value 0 DRAM Drive Strength Level 7 DRAM Data Drive Strength Level 2 Max Async Latency 07.0 Nano Seconds DRAM Response Time Fast Read Preamble Time Auto Idle Cycle Limit 256 Cycles Dynamic Counter Disable R/W Queue Bypass 16 x Bypass Max 07 x 32 Byte Granulation Disable (4 Bursts) Quote Share this post Link to post Share on other sites More sharing options...
SaFrOuT Posted August 4, 2005 Posted August 4, 2005 winnie are known to have a wall @ 2.4GHz so i think it is nice to be able to reach 2.47 but what is the date of man. of ur cpu ??? and i would suggest to try 9x multi and increase ur FSB and see start from 275x9 and see what will u reach Quote Share this post Link to post Share on other sites More sharing options...
jbuckley21 Posted August 4, 2005 Posted August 4, 2005 Thats the wierd thing, I drop it to 9 and max at at like 252 before it wont boot my windows login. So I feel like I am missing something. I havent set my memory at all, but supposedly its wicked with this board, so i have it at 1/01. Not sure on the man date on my model, but 2.4 really is the wall? Grrrrrr, Im going to fry so I have an excuse to tell my wife I need a new one. Quote Share this post Link to post Share on other sites More sharing options...
jbuckley21 Posted August 4, 2005 Posted August 4, 2005 Anyone know if Bios could be an issue? The only other comment I have received is that it could be power supply, but would not explain my wall and 252 despite using 9 or 10. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.