Jump to content
Sign in to follow this  
roystont5038

Stable BIOS 711 settings for my rig please.

Recommended Posts

Hi,

 

The 711 BIOS worked faultlessly until I tried to change some settings. Nothing very significant, nothing to do with CPU or memory.

 

Last I remember, I changed 'OS select for DRAM >64MB' from OS2 to something else, as I do not have OS2 on my computer, 'Init dispaly first' from PCI to AGP, and also changed the temperature for shutdown to 60. (The computer is not yet inside the case, but is spread out over a table).

 

After that the BIOS would not even boot at all, until I cleared the CMOS and loaded optimised defaults.

 

I do not want to overclock. I reckon that I do not need to, as already I have a very fast CPU and very good memory running at 2.2.2.5.

 

Will you please advise what Bios settings I need to change just so that my computer will run stable and faultlessly, and I will be taking full advantage of the capabilities of the motherboard.

 

I will leave the computer still on the table until the BIOS settings are finalised, as it is much easier to clear CMOS with the motherboard out on a table, than inside a crowded case.

 

Thanking you

roystont5038

Share this post


Link to post
Share on other sites

Anyone?

 

OK to keep it short: What do these entries do and to what should they be set?

Full screen logo

UBS mem type

UBS KB/storage support

HDD power down

HDD down in suspend

DDR output driving

DDR DQ drive strength

 

Many thanks

roystont5038

Share this post


Link to post
Share on other sites

Don't have a board, but if the optimized settings are working, why change?

 

I do know that it doesn't matter which setting you have the full screen logo on.

 

CJ

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...