ebd.i.am Posted July 31, 2005 Posted July 31, 2005 On my DFI lanparty ut nf4 ultra-d, got my AMD64 3700+ SanDiego and OCZ 1GBx2 DDR400 PC3200 to this... AND What you think? Lower/change/go higher? in something? My cpu runs anywhere from (depending on room temp)... 27c - 35c idle 44c - 51c full load. give or take a few C. + i just built this last week, i dont think my AS5 set yet. seems to be stable when i run prime95, play games, etc... Quote Share this post Link to post Share on other sites More sharing options...
Prostock62 Posted July 31, 2005 Posted July 31, 2005 Looks good.You can try to tighten up your timming a bit. (2 2 2 5) Its up to you but your looking good. Quote Share this post Link to post Share on other sites More sharing options...
soundx98 Posted July 31, 2005 Posted July 31, 2005 OC looks good but doesn't tell us much about stability. Run OCCT and Prime95 for stress. Check out the OC Database thread if stable and post results there. Quote Share this post Link to post Share on other sites More sharing options...
Guest kris Posted July 31, 2005 Posted July 31, 2005 Looks good to me! It took me forever to get from 2750 to 2800 and be stable. Finaly just had to bite the bullet and up the volts. Quote Share this post Link to post Share on other sites More sharing options...
ebd.i.am Posted July 31, 2005 Posted July 31, 2005 Looks good.You can try to tighten up your timming a bit. (2 2 2 5) Its up to you but your looking good. Yeah i tried going 2-2-2-5 but i cant get there, wont boot, any ideas??? OC looks good but doesn't tell us much about stability. Run OCCT and Prime95 for stress. Check out the OC Database thread if stable and post results there. ran prime95 for many hours, ill try overnight later. Havnt tried OCCT, any different from Prime95? Also my pc did crash playing bf2 (glitchy game as it is) but i think it might be my GPU oc, might be too high. Looks good to me! It took me forever to get from 2750 to 2800 and be stable. Finaly just had to bite the bullet and up the volts. what volts are u running to get to 2.8? same as mine? Quote Share this post Link to post Share on other sites More sharing options...
red930 Posted July 31, 2005 Posted July 31, 2005 ran prime95 for many hours, ill try overnight later. Havnt tried OCCT, any different from Prime95? I like running OCCT torture for 2-3 hrs 1st b4 trying to run prime overnite,seems most times it will find weaknesses quicker Quote Share this post Link to post Share on other sites More sharing options...
ebd.i.am Posted July 31, 2005 Posted July 31, 2005 can u give me a link for OCCT, cant seem to find it Quote Share this post Link to post Share on other sites More sharing options...
red930 Posted July 31, 2005 Posted July 31, 2005 http://www.dfi-street.com/forum/showthread.php?t=12586 Make sure when you run prime it's the latest ver Quote Share this post Link to post Share on other sites More sharing options...
ebd.i.am Posted July 31, 2005 Posted July 31, 2005 i gots v24.13, seems to be the latest i think Quote Share this post Link to post Share on other sites More sharing options...
ebd.i.am Posted August 1, 2005 Posted August 1, 2005 i ran OCCT for about 4hours 30mins, and it found my system was unstable... What should i do? bump up volts on cpu? or what? Quote Share this post Link to post Share on other sites More sharing options...
JfRsQ Posted August 1, 2005 Posted August 1, 2005 Your Vcore is @1.16V :confused: Quote Share this post Link to post Share on other sites More sharing options...
ebd.i.am Posted August 1, 2005 Posted August 1, 2005 i dunno either, on CPU-z it says my Voltage is 1.664v even on speedfan in the pic it says 1.66v Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.