Jump to content
Sign in to follow this  
Spyskank

Venice 3000 Ocing limit irql BSOD

Recommended Posts

Stable now as in my sig.

 

Can get it up to 2754 stable with 1.54

 

Beyond that, 308 and up, i get bsob with driver_irql_not_less, usually with nv_ata_bus.sys, once ati_tool.sys and once tcip.sys.

 

increasing volts dunt change anything.

 

Have tried nforce drivers 6.53, 6.66 with and without smbus.

 

oh.. yeah... Any hints ??

Share this post


Link to post
Share on other sites

yeah i thought so too..

sighhhh... wanted to get 2808 so ad... sniff sniff..

 

BUT

 

primed and benched at 2750 with 1.40 lol....

Share this post


Link to post
Share on other sites

Thats the same speed I hit on mine and it wouldnt go no further. Heres some things I noticed when trying to go higher. At your same voltage I got the same speed with stock heatsink and couldnt get no higher. I had to tear off the stock heatsink and put as5 and a Venus + 12 on there to get to 2808. I noticed it took alot more voltage to get any higher than 2754. I had to set the vcore to 1.350 and the special to 123%. I was able to get to 2808 and now Im getting the same problem. You start reaching the wall on your cpu when voltage starts to give less and less mhz. I recommend trying the latest drivers from nvidias site. Noticed windows hasnt got corrupted since I installed them. Well hope this helps good luck.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...