rompower Posted July 27, 2005 Posted July 27, 2005 Hi there! I just bought a DFI Lanparty UT Nf3 Ultra-D Memory, OCZ Dual Channel EL Gold VX Series OCZ4001024ELDCGEVX-K w/ Heatspreader (2x 512MB DDR400 Matched Pair, CAS 2-2-2-8@ 3.2V) CPU: AMd 64 3200 Core Venice Now here's my problem I put one stick of memory in #1 slot and #3... With last bios flashed, was able to set speed to 200..but.. there's a problem, detected in cpu-z... still in SINGLE channel..while supposed to be in dual channel. Second problem. As soon as I want to overclock, I put 205 instead of 200 for my cpu speed... and... well.. my computer didn't want to boot at all... I had to clear my cmos... what's going wrong?!?!? :| CPU voltage: 1.280, speed. 2009mhz HTT: 201.0 mhz Memory: CAs latency. 2.5 ras to cas. 3 ras precharge 3 cycle time 6 bank cycle time 10 dram idle timer 16 SPD table: Frequency: 200 CAs: 2.5 ras to cas: 3 ras precharge 3 Tras: 7 Can anyone help me, I am kinda desesperate :| Share this post Link to post Share on other sites More sharing options...
AndrewZorn Posted July 27, 2005 Posted July 27, 2005 not that it should cause such elaborate problems but i heard 2&4, the orange ones, are better Share this post Link to post Share on other sites More sharing options...
rompower Posted July 27, 2005 Posted July 27, 2005 I cannot start.. if 2 sticks of memory aren't inserted... one.. not starting...2... not starting... I tried everything! EVEN with a different brand of memory... all I got is a continuous beeping... :| Share this post Link to post Share on other sites More sharing options...
red930 Posted July 27, 2005 Posted July 27, 2005 Can you please create a sig as per forum rules,thanks http://www.dfi-street.com/forum/showpost.p...701&postcount=2 Share this post Link to post Share on other sites More sharing options...
oliveryochest Posted July 27, 2005 Posted July 27, 2005 what bios did you flash to??? are you putting the memory in slots 1 & 3??? the yellow slots and please make a sig with all components including bios version Share this post Link to post Share on other sites More sharing options...
rompower Posted July 27, 2005 Posted July 27, 2005 Playah.. I am not here to create a rig.. to do some show off.. I need help I listed everything I have... Big Typhoon to cool my cpu...temp 35 degree idle... full load, don't know yet...too unstable to try something Share this post Link to post Share on other sites More sharing options...
rompower Posted July 27, 2005 Posted July 27, 2005 a Rig ..a rig... DFI Lanparty UT NF3 Ultra-D AMD 64 3200 Venice Big Typhoon OCZ Dual Channel EL Gold VX Series OCZ4001024ELDCGEVX-K w/ Heatspreader 2X512 Asus V9999GT 128mb WD Raptor 74 gb OCZ Modstream 520 Just flashed Bios with 711... from 07/11/2005 Is this ok for "rig"? Share this post Link to post Share on other sites More sharing options...
rompower Posted July 27, 2005 Posted July 27, 2005 I try to put memory in all 4 slots available.. at the moment I have one in the #1 and another one in the #3 cpu-z tells me that is SINGLE channel...and.. well #1 is in yellow #3 is in orange What's wrong? Share this post Link to post Share on other sites More sharing options...
Lordbollo Posted July 27, 2005 Posted July 27, 2005 Due to what ever reason at dfi channels #1 and #3 are the 2 orange coloured ones and #2 and #4 are the yellow ones. I had the exact same problem but put both sticks in the same coloured slots and presto dual channel. Also on my board if i have the memory timming at 1T then it will crash all the time if i force 2T then stable as a rock. Memtest 86+ fails within 5 mins on 1T but went for over 24hrs on 2T. Share this post Link to post Share on other sites More sharing options...
rompower Posted July 27, 2005 Posted July 27, 2005 Big Thanks you Lordbollo... NEVER READ MANUAL! THey're never right... ;P Dual channel now! Let's resolve the other problem.. Overclocking... As soon as I put 203-205... my computer do not boot.. I tried with 205 and I had to clear cmos... :| ANy idea? Voltage? HTT? Multiplier??? Share this post Link to post Share on other sites More sharing options...
rompower Posted July 27, 2005 Posted July 27, 2005 Lordbollo.. I am new in OC'ing... what is the 1T and 2T ? Thanks Share this post Link to post Share on other sites More sharing options...
red930 Posted July 27, 2005 Posted July 27, 2005 RomPower: Please read the forum rules, as is required before making your first post. In addition, please update your sig (as you have already been asked to do) and be as detailed as possible so that we may better understand what hardware configuration you have. Click on the link in my sig for instructions on how to do so. If you are having difficulties creating your sig, for whatever reason, then PM me and I will be glad to help. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now