Guest Iceman Posted July 16, 2005 Posted July 16, 2005 I just want to know if i should push my cpu more? venice 3500 ocz vx 1 gig im at 250x11=2750 load 45c in the morning should i push it more would like 50 more mhz make any diff? iam happy as it is! It is occt stable! Quote Share this post Link to post Share on other sites More sharing options...
red930 Posted July 16, 2005 Posted July 16, 2005 Is it 8hr or more prime stable? Quote Share this post Link to post Share on other sites More sharing options...
loc.o Posted July 16, 2005 Posted July 16, 2005 Are you sure the CPU actually needs that amount of volts to do 11*250? Its a lot on air. Quote Share this post Link to post Share on other sites More sharing options...
THunDA Posted July 16, 2005 Posted July 16, 2005 1.325x123% 1.669 vcore idle 32c load 45c This is up to you.. Im using the same vcore on my Sandy, but I wont take it past that ( for now at least..lol).. I say if your temps are good (which they are) and you can get more without raising the vcore .. Why not ? Quote Share this post Link to post Share on other sites More sharing options...
Guest Iceman Posted July 16, 2005 Posted July 16, 2005 did not test prime but swat4 stable i test prime tonight! well i know it is a lot of volts but my temp is around 43-45c load when i tested a cpu alone from ram these are the settings i got! 210x11=2300mhz stock vcore 220x11=2420mhz stock vcore 230x11=2530mhz stock v core 240x11=2640mhz 1300x113% 1.469 250x11=2750mhz 1.325x126% 1.669 from 24 to 250 theres a big jump in vcore i dont know why but i will test further and do the cpu burn in too! Although i feed it with a lot of vcore my temps are excellent! What do you guys recomend? Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.