archdragon Posted July 16, 2005 Posted July 16, 2005 Hey all, i finaly got my comp up and running persay. But im still getting random software shut downs, like AIM, and IE. Plus im getting pool_memory_dumps after i install drivers, or try to install large information software (WoW). Anyone got any ideas, i have already ran mem test for 14+ hours with no errors, and have my ram set to 3,3,8,3. im begining to get lost, lol.. Thanks for the help! Share this post Link to post Share on other sites More sharing options...
Guest Joalaielna Posted July 16, 2005 Posted July 16, 2005 What tipe of ram is that Samsung? And what volts are you using atm? Share this post Link to post Share on other sites More sharing options...
suio Posted July 16, 2005 Posted July 16, 2005 Does your system pass OCCT? Share this post Link to post Share on other sites More sharing options...
archdragon Posted July 16, 2005 Posted July 16, 2005 OCCT? curcial is a brand name of ram, running at 2.8v right now Share this post Link to post Share on other sites More sharing options...
Sharp Posted July 16, 2005 Posted July 16, 2005 Hello, Did you plug all 4 power connectors into the board? Share this post Link to post Share on other sites More sharing options...
archdragon Posted July 16, 2005 Posted July 16, 2005 yes, all 4 are plugged in, it keeps saying its a driver problem, but i have no idea were to start to find out whats causing it Share this post Link to post Share on other sites More sharing options...
red930 Posted July 16, 2005 Posted July 16, 2005 Have you memtested your RAM? Share this post Link to post Share on other sites More sharing options...
Sharp Posted July 16, 2005 Posted July 16, 2005 Hello, Try this in the BIOS GENIE BIOS Setting >DRAM Configuration..................Press Enter = New Menu FSB BUS Frequency....................200 DRAM Voltage Control.................2.80 V GENIE BIOS Setting >DRAM Configuration DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01) Command per clock (CPC)..............Enabled Cas latency (tCL)....................3 RAS to CAS delay (tRCD)..............3 Min RAS active time (tRAS)...........8 Row precharge time (tRP).............3 Row cycle time (tRC).................AUTO Row refresh cycle time(tRFC).........AUTO Row to Row delay (tRRD)..............AUTO Write recovery time (tWR)............AUTO Write to read delay (tWTR)...........AUTO Read to write delay (tRWT)...........AUTO Refresh period (tREF)................AUTO Write CAS latency (tWCL).............AUTO DRAM Bank Interleave.................Enabled DQS Skew Control.....................Decrease Skew DQS Skew Value.......................0 DRAM Drive Strength..................AUTO DRAM Data Drive Strength.............AUTO Max Async Latency....................6ns Dram Response........................Normal Read Preamble Time...................5ns Idle Cycle Limit.....................AUTO Dynamic Counter......................Disabled R/W Queue Bypass.....................AUTO Bypass Max...........................AUTO 32 Byte Granularity..................Disable (8 Bursts) Share this post Link to post Share on other sites More sharing options...
archdragon Posted July 16, 2005 Posted July 16, 2005 Still getting random shut downs, wonder if reinstalling windows would help... Share this post Link to post Share on other sites More sharing options...
Sharp Posted July 16, 2005 Posted July 16, 2005 Hello, Give the reinstall a go. When you install the nvidia chipset drivers, Do not install the firewall (network access manager) Do not install the IDE drivers Also try disabling CPC in the BIOS. Share this post Link to post Share on other sites More sharing options...
archdragon Posted July 16, 2005 Posted July 16, 2005 ok, ill give it a try. Im thinking it might be soemthing with graphic drivers( ive read about people having problems with nvidia graphic drivers). soem times when i get it back working, i get either a device driver caused it, or spacificly the graphic drivers Share this post Link to post Share on other sites More sharing options...
archdragon Posted July 17, 2005 Posted July 17, 2005 Went to install windows again, and im getting same message... IRQL_NOY_LESS_OR_EQUAL Tech: 0x000000A(0x00000080, 0x00000002, 0x00000000, 0x8050a517) anyone got any ideas? this happens after you get into were windows starts to install drivers and such off the disc. after you format and it installs the instalation files Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now