nutop Posted July 14, 2005 Posted July 14, 2005 Mhz:200 CPC:Enabled Tcl:2.5 Trcd:3 Tras:6 Trp:3 Trc:9 Trfc:12 Trrd:2 Twr:2 Twtr:2 Trwt:2 Tref:3072 Twcl:1 DRAM Bank Interleave:Enable DQS Skew Control:Increase DQS Skew Value:255 DRAM Drive Strength:7 DRAM Data Strength:Auto Max Async Latency:7 DRAM Response Time:Normal Read Preamble Time:5 IdleCycle Limit:Auto Dynamic Counter:Enable R/W Queue Bypass:16x Bypass Max:7x 32 Byte Granularity: Disable The Voltage on the Chips is set to 3.2 When I have CPC set to disable (2T), it will boot fine. 1T is a no go.. it will boot but will eventually blue screen. Does running 2T really make that big of a difference since i can acheive my desired overclock? Quote Share this post Link to post Share on other sites More sharing options...
(Rockafella) Posted July 15, 2005 Posted July 15, 2005 Run some benchmarks and see what the difference in speed is with different settings. Thats the best way to find out. Quote Share this post Link to post Share on other sites More sharing options...
Trevor Posted July 15, 2005 Posted July 15, 2005 I second that Quote Share this post Link to post Share on other sites More sharing options...
bread Posted July 15, 2005 Posted July 15, 2005 If you live for Sandra and Everest scores you'll want to try for 1T. That's all that really matters in the whole 1T 2T thing if ya catch my drift. :dog: Quote Share this post Link to post Share on other sites More sharing options...
nutop Posted July 15, 2005 Posted July 15, 2005 thanks for the advice guys Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.