Jump to content
Sign in to follow this  
Exar_333

UTT questionnaire (UTT current/ex users)

Recommended Posts

I cannot run a Poll, but this is the closest thing I can do:

 

please respond only if you have used or currectly use UTT-based memory

 

(1) you are still using UTT memory @ 3.2V or LOWER

 

(2) you are still using UTT memory @3.3V or HIGHER

 

(3) you used UTT before, and then changed to a different type due to problems

 

(4) you used UTT before, and then changed for unrelated reason

 

ALSO, please note if you had any cold-boot issues related

 

**I experienced cold-boot and have had to recently change RAM types (damaged the 4000vx modules, but MB is fine), and am curious as to how many other people may or may not have had the same issue**

Share this post


Link to post
Share on other sites

im still using my utt with 3.4 volts off the 5volt rail and i have been fortunate enough to never have had any issue, including the cold boot. :)

Share this post


Link to post
Share on other sites
Guest scott

#3.

 

Changed from untested (UTT) to TCC5, glad I did.

Share this post


Link to post
Share on other sites

#2

I had some problems with what I think is actually a 5vsb overamp using j17 in the 5 volt position, but I moved to an sio mod, and ocz booster, no problems since.

 

Running totally stable at 246*11 @ 1.5-2-2-5

Runs most peoples stable at 240*12 @1.5-2-2-5

Share this post


Link to post
Share on other sites

#1 atm cuz its summer

was running at 3.4 for a month or so then i heard about the killer 5V jumper so i put it back

 

havent had problems with either setting tho

Share this post


Link to post
Share on other sites
Guest burningrave101

#4

 

I had some G.Skill UTT-BH installed but decided to move to 2x1024MB and lower voltage stuff because i couldn't get that high of overclock with only 3.2V and i didn't want to move to the 5V jumper OR overclock my 3.3V rail.

Share this post


Link to post
Share on other sites

just got my ocz value vx stable at 3.4v 1.5-2-2-8 5/6 divider 1t 3000+venice at 2.4ghx on air, can go higher but want longevity...

10hrs prime 95 stable,runs prime and 3dmark01 same time for 2 hrs.

 

im loving it.

Share this post


Link to post
Share on other sites

1 / 2

Been using 3.3v stable for quite a while, but I'm down at 200MHz 2.6v for a while now. Never had any trouble, although since I rarely turn my machine off I guess that is to be expected regarding the cold boot trouble.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...