babyelf Posted June 23, 2005 Posted June 23, 2005 System3000+ Venice DFI NF4 Ultra-D 618-3 bios MSI 6800GT 2x 512MB Gskill PC4400LE 120GB WD SATA OCZ Powerstream 520W WinXP Pro SP2 NF4 6.39 chipset drivers 2x 1GB 512MB Gskill PC4400LE dual channel kit Quote Share this post Link to post Share on other sites More sharing options...
babyelf Posted June 23, 2005 Posted June 23, 2005 Vdimm = 2.73V @ DDR600VID = 1.4 VID Special = 110% chipset = 1.7 LDT = 1.3v LDT 3x CPC = Enabled CAS Latency(CL) = 2.5 RAS to CAS(Trcd) = 3 Min RAS# Active time(Tras) = 7 Row Precharge Time(Trp) = 3 Row Cycle Time(Trc) = 7 Row Refresh Cycle Time(Trfc) = 14 Row to Row Delay(Trrd) = 2 Write Recovery Time(Twr) = 2 Write to Read Delay(Twtr) = 2 Read to Write Delay(Trwt) = 3 Refresh Period (Tref) = 2048 Write CAS Latency(Twcl) = Auto DRAM Bank Interleave = Enabled Skew = AUTO Skew Value = 0 DRAM Drive Strength = AUTO DRAM Data Drive Strength = AUTO DDRAM Response Time = Normal Max Async Latency = 9ns Read Preamble Time = 6ns Idle Cycle Limit = 256 Dynamic Counter = Enabled R/W Queue Bypass = 16x Bypass Max = 7x 32 byte Granularity = Disable(4burst) 320MHZ 2.5-4-3-7 Vdimm = 2.83V @ DDR620VID = 1.5 VID Special = 110% chipset = 1.7 LDT = 1.3v LDT 3x CPC = Enabled CAS Latency(CL) = 2.5 RAS to CAS(Trcd) = 4 Min RAS# Active time(Tras) = 7 Row Precharge Time(Trp) = 3 Row Cycle Time(Trc) = 7 Row Refresh Cycle Time(Trfc) = 14 Row to Row Delay(Trrd) = 2 Write Recovery Time(Twr) = 2 Write to Read Delay(Twtr) = 2 Read to Write Delay(Trwt) = 2 Refresh Period (Tref) = 2048 Write CAS Latency(Twcl) = Auto DRAM Bank Interleave = Enabled Skew = AUTO Skew Value = 0 DRAM Drive Strength = AUTO DRAM Data Drive Strength = AUTO DDRAM Response Time = Normal Max Async Latency = 9ns Read Preamble Time = 6ns Idle Cycle Limit = 128 Dynamic Counter = Enabled R/W Queue Bypass = 8x Bypass Max = 4x 32 byte Granularity = Disable(4burst) Special Thanks to G.Skill and Mittoni Quote Share this post Link to post Share on other sites More sharing options...
babyelf Posted June 23, 2005 Posted June 23, 2005 reserved for results DDR650 [bIMG]http://www.comeapart.com/babyelf/New%20Folder/325mhzsuperpi1mb2.JPG[/bIMG] Quote Share this post Link to post Share on other sites More sharing options...
babyelf Posted June 24, 2005 Posted June 24, 2005 updated with DDR650 Quote Share this post Link to post Share on other sites More sharing options...
Guest jot Posted June 24, 2005 Posted June 24, 2005 Hey B elf whats the ref rate on those guys 7.8us? Quote Share this post Link to post Share on other sites More sharing options...
babyelf Posted June 24, 2005 Posted June 24, 2005 they're @ 2048 Quote Share this post Link to post Share on other sites More sharing options...
Guest jot Posted June 24, 2005 Posted June 24, 2005 2048 tref 133 1.95us I mean the modules themselfs the self ref rate. Should say it on the module. Quote Share this post Link to post Share on other sites More sharing options...
babyelf Posted June 24, 2005 Posted June 24, 2005 come again? Quote Share this post Link to post Share on other sites More sharing options...
Guest jot Posted June 24, 2005 Posted June 24, 2005 Download (everest) and go to the motherboard sec on right click spd and it will tell u what refesh rate those mod's run at. Man those guys will run 2-2-2 prob at 3.1 or 3.2 I hear the new mod's really like the volts. Quote Share this post Link to post Share on other sites More sharing options...
Guest jot Posted June 24, 2005 Posted June 24, 2005 Not that u don't know but it really matters when pick'n a tref at dif fsb. I just about got this tref deal by the balls. In the bios they have 2 different group of settings for each ref class 8 sett for 15.6us 8 for 7.8us 8 for 3.9us and 8 for 1.95us. Quote Share this post Link to post Share on other sites More sharing options...
babyelf Posted June 24, 2005 Posted June 24, 2005 reduced 7.8us , self refresh 2-2-2 @ what frequency? lol.. week 437 and 440 don't like voltage.. the later ones do Quote Share this post Link to post Share on other sites More sharing options...
Guest jot Posted June 24, 2005 Posted June 24, 2005 Ok thats what I thought. Try this tight'n those timmings as tight u can get em up your vdimm to keep them stable, try to get your fsb as high as can use 150 on mem divid 4672 on tref 7 on drive strengh. And make those mod's bark. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.