Balduran Posted June 16, 2005 Posted June 16, 2005 I have installed all the parts and I have all the power hookups on the motherboard. However, I receive a "no signal" when I try booting with my Hydundai monitor (DVI cable) and also the optical drive will not open. I am very confused. I believe all the connections are solid and not loose. The debug LEDs have 4 lit and all LEDs appear lit. I believe my power supply is within the PSU thread and I'm sure there are many people with this RAM, so I'm confused as to why I cannot get neither a signal to the monitor nor the drive to open. (I tried both DVI and regular monitor cords, the fan on the GPU is running and everything appears normal). I don't know if my SATA hard drives are spinning up either, they are either really quiet or something is amiss. The NEC is set to master on the jumpers, I didn't plug in the PCI-e because either I'm really dumb or there isn't anywhere to plug it into. Quote Share this post Link to post Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.