lanparty nf4 sli-dr bios problem

[g-ru]

in the lanparty nf4 sli-dr manual,(bios section) in the intergrated peripherals section labelled ide function setup theirs a serial-ata 1 and sata 2 which you can enable and disable. my problem is that i do not see them in my bios. i also updated to the latest bios.any suggestions

[Angry_Games]

please check the rules and the Important Info threads stuck to the top of this section.

 

If you are looking for help, reading this is the most important first-step for you to take.

 

this helps us tremendously to help you solve your issue if we can see what is in your system every time you post:

 

 

 

PLEASE SEE THIS LINK!:

http://www.dfi-street.com/forum/showpost.p...701&postcount=2

 

 

 

Be as thorough as possible please. Voltages, timings, settings, bios version, etc.

 

The more information you give us about the problem, and the more details about your hardware in your sig = more help we can give you.

 

 

 

 

 

 

 

 

 

(Genie BIOS Section)

 

(integrated periphials section = only for enabling/disabling RAID function on particular IDE/SATA channels)

[g-ru]

i have that in the genie bios section.and i have the enabling and disabling raid function in the intergrated periherals section.but in the manual if you get into the ide function setup which is the first setup in the intergrated peripherals it does show serial-ata1 and serial-ata2 which enable the nvidia nforce 4 chipset

[Angry_Games]

why are you worrying about what the manual says????

 

look in the actual bios of the actual board. Forget the manual...what is in the bios is what is real (manuals are subject to change/error)

[g-ru]

i just wanted to make sure nothing was wrong with this new board.but problem resolved it was in the old bios.