loggan26 Posted May 10, 2005 Posted May 10, 2005 DFI Infinity UI nF2 - 12/18/2003 BIOS (Oskar Wu Beta BIOS) AMD Athlon XP Mobile 2500+ Barton Socket 462 Processor Model AXMH2500FQQ4C - IQYHA0402SPMW stepping 2x256MB Corsair XMS PC3500 BH-5 ATI Saphire 9800pro 128MB 256-bit Video Card, Radeon Omega Drivers 2x Western Digital (8mb) WD800JB 80GB 7,500 RPM ATA100 Hard Drive (RAID-0), Sillicon Image Raid 5.0.6.4 Bios, Sillicon Image Windows Raid driver 1.0.0.8 Samsung TS-H352AWBGH 16x48x DVD-ROM (Black) - OEM (CD-002-SA) Nec ND4551 16x dual layer +/- DVDWriter Enermax PSU 431w 20-pin ATX power supply Thermalright SLK-900a copper heatsink + Vantec Tornado TD9238H 92mm adjustable fan * * ========== Genie Bios Settings * * Genie Bios Settings: ======CPU/Dram Clock Settings====== CPU Clock Setting - 250 AGP Clock Setting – 67Mhz CPU Ratio – X 10.5 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.90v AGP Voltage Control – 1.50v Chipset Voltage Control - 1.70v DRAM Voltage Control - 3.30v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Enabled Sil3114 S-ATA Control – Sata Raid DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 2 T(RCD – Write) – 3 T(RP) – 2 Cas Latency – 2.0 T(RC) – 12 T(RFC) – 15 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 128 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.21: 3dMark2003: 3dMark2005: Aquamark 3d: Everest Home Edition V2.00.325(Beta): ========== Short Description: Bios Version - Oscar Wu's 12/18/03 250x10.5 @ 2630Mhz, 1.90v 11-2-3-2-2 @ 3.3v vdimm Share this post Link to post Share on other sites More sharing options...
Shinobi Posted May 18, 2005 Posted May 18, 2005 DFI Infinity nF2 Ultra - Hellfires Infinity Rev3 Bios AMD Athlon XP Mobile 2500+ Barton Socket 462 Processor Model AXMH2500FQQ4C - IQYHA0408RPMW stepping 2x256MB Twinmos PC3200 CADT 1x512mb Hynix PC3200 BT-D43 MSI Geforce FX5600 TD256 MSI-StarForce 71.25 Drivers 120Gb Seagate Barracuda 7200.7 NCQ SATA ST3120827AS Sil 5.1.27 Hellfire Modded Bios, Sil Driver 1.0.0.7 Asus 5224A CD-RW Nec ND3500 16x Dual Layer DVD-RW Hiper HPU-4S525 525watt 24Pin ATX 2.2 PSU Thermaltake Volcano12 HSF 3x Thermaltake Smartfan II CaseFans Chieftec BX-01-B-B-B Case * * ========== Genie Bios Settings: * * ======CPU/Dram Clock Settings====== CPU Clock Setting - 215 AGP Clock Setting – 66Mhz CPU Ratio – X 12 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.80v AGP Voltage Control – Auto Chipset Voltage Control - Auto DRAM Voltage Control - 2.80v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Enabled Sil3114 S-ATA Control – Sata Raid DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 8 T(RCD – Read) – 3 T(RCD – Write) – 3 T(RP) – 3 Cas Latency – 2.5 T(RC) – 13 T(RFC) – 15 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast Command Per Clock - Disabled DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 128 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Enabled Video RAM Cacheable - Enabled Prime95 + 3dMark2001SE + CPU-Z 1.28.6: http://img71.echo.cx/img71/8944/ocdatabase0xb.jpg 3dMark2003: http://img190.echo.cx/img190/2625/3dmark037ll.jpg 3dMark2005: http://img190.echo.cx/img190/4548/3dmark052ij.jpg Aquamark 3d: http://img71.echo.cx/img71/7426/aquamark34wu.jpg[/bimg] Everest Home Edition V2.00.325(Beta): http://img71.echo.cx/img71/4722/everestread2cf.jpg http://img71.echo.cx/img71/5650/everestwrite3ue.jpg http://img71.echo.cx/img71/6839/everestlatency4qg.jpg ========== Short Description: Bios Version - Hellfires Infinity Rev3 215x12 @ 2585Mhz, 1.80v 8-3-3-3-2.5 @ 2.8v vdimm Additional Information: Idle Temps Case = 24°C CPU = 33°C Full Load Temps Case = 25°C CPU = 45°C Share this post Link to post Share on other sites More sharing options...
red930 Posted May 28, 2005 Posted May 28, 2005 DFI Lanparty NFII-b Ultra Hellfire 3EG-REV2 AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMH2600FQQ4C - IDYHA 0503 TPMW stepping 2x512mb Mushkin PC3200 Lvl2 v2 TCCD Leadtec A6600 GT TDH w/Logisys HS Nvidia 66.97 Drivers Maxtor Diamondmax Plus 9 6Y080Mo Serial ATA150 x2 Raid0 Plextor PX-712A CD/DVD-RW Super Flower TT500SS (TTGI) 500w ATX w/12cm Fan PSU Thermalright SI-97 HSF Thermaltake Smartfan 90mm(on HS) SuperFlower SF201T Case * * ========== Genie Bios Settings: * * ======CPU/Dram Clock Settings====== CPU Clock Setting - 240 AGP Clock Setting – 66Mhz CPU Ratio – X 11 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.90v AGP Voltage Control – 1.6v Chipset Voltage Control - 1.7v DRAM Voltage Control - 2.70v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled Sil3114 S-ATA Control – Sata Raid DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 3 T(RCD – Write) – 3 T(RP) – 3 Cas Latency – 2.5 T(RC) – 13 T(RFC) – 15 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast Command Per Clock - Enabled DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 256 AGP 8X Support – Enabled AGP Fast Write Capability – Disabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.28.6: http://img152.echo.cx/img152/3308/idyha11x240tccd19v1ct.gif 3dMark2003: http://img47.echo.cx/img47/7599/11x2403dmark039xt.gif 3dMark2005: http://img152.echo.cx/img152/3412/11x2403dmark052ek.gif Aquamark 3d: http://img287.echo.cx/img287/6306/aq3gif0wr.jpg Everest Home Edition V2.00.325(Beta): http://img287.echo.cx/img287/6530/everestread5br.gif http://img287.echo.cx/img287/2422/everestwrite8zz.gif http://img287.echo.cx/img287/9046/everestlatency2aa.gif ========== Short Description: Bios Version - Hellfires Lanparty 3EG-REV2 240x11 @ 2646Mhz, 1.90v 11-3-3-3-2.5 @ 2.7v vdimm Additional Information: Idle Temps Case = 29°C CPU = 31°C Full Load Temps Case = 31°C CPU = 46°C Share this post Link to post Share on other sites More sharing options...
Mr Stom Posted June 1, 2005 Posted June 1, 2005 DFI Lanparty Ultra-B NFII - 6/19/2004 BIOS (Oskar Wu Beta BIOS) AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMG2600FQQ4C - IQYHA0431CPEW stepping 2x512MB MUSHKIN BASIC GREEN Gigabyte ATI Radeon 9700pro 128MB Video Card Clocked at 390Mhz core, 340Mhz mem , Radeon Omega Drivers 2.6.05a Maxtor DiamondMax Plus 9 120GB 6Y120MO SATA hard drive Hitachi Deskstar 7K250 160GB SATA hard drive PLEXTOR PX-116A DVD-ROM PLEXTOR PX-712A DVD-RW ANTEC NEOPOWER 480w PSU Thermalright SP-97 copper heatsink + THERMALTAKE SmartFan II 80mm * ========== * Genie Bios Settings: ======CPU/Dram Clock Settings====== CPU Clock Setting - 230 AGP Clock Setting – 66Mhz CPU Ratio – X 11 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.95v AGP Voltage Control – 1.60v Chipset Voltage Control - 1.80v DRAM Voltage Control - 3.10v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled RTM Lan Device Control- Enabled RTM Lan Boot ROM - Disabled Sil3114 S-ATA Control – Sata Raid DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 3 T(RCD – Write) – 3 T(RP) – 3 Cas Latency – 2.5 T(RC) – 13 T(RFC) – 15 T(DOE) - Auto T(RRD) - Auto T(W2P) - Auto T(REXT) - Auto T(R2P) - Auto T(R2W) - Auto SuperBypass – Enabled Sync Mode Memory Bypass – Auto Data Scavenged Rate – Fast Command Per Clock - Enabled DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 128 AGP 8X Support – Enabled AGP Fast Write Capability – Disabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.21: http://i7.photobucket.com/albums/y261/stomly/ocdbxp1280.jpg 3dMark2003: http://i7.photobucket.com/albums/y261/stomly/ocdb3d03xp.jpg 3dMark2005: http://i7.photobucket.com/albums/y261/stomly/ocdb3d05xp.jpg Aquamark 3d: http://i7.photobucket.com/albums/y261/stomly/ocdbamxp.jpg Everest Home Edition V2.00.325(Beta): http://i7.photobucket.com/albums/y261/stomly/ocdbevxp.jpg http://i7.photobucket.com/albums/y261/stomly/ocdbev2xp.jpg ========== Short Description: Bios Version - 6/19/04 230x11 @ 2530Mhz, 1.95v 2.5-3-3-11 @ 3.1v vdimm Share this post Link to post Share on other sites More sharing options...
Clay Posted January 20, 2006 Posted January 20, 2006 DFI Infinity UI nF2 - 6/19 BIOS "Shinobi"Modded Tic-Tac 6/19XT AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMG2600FQQ4C - IQZFAQ347RPMW stepping 1x512 OCZ platinum pc4800 Albatron 6800gt Trinity NForce 81.95 drivers 1x Western Digital (8mb)Raptor2, Onboard 3114 controller Rosewill 52-32-16 CD-R/RW DVD-ROM Combo(Black) Asus 1608p2 16x dual layer +/-RAM DVD Recorder Black OCZ PowerStream 520SLI 20-24-pin ATX power supply Thermaltake Volcano12 Extream Edition copper heatsink + Vantec Tornado TD9238H 92mm adjustable fan =====1X512===== Genie Bios Settings: ======CPU/Dram Clock Settings====== CPU Clock Setting - 262 AGP Clock Setting – 67Mhz CPU Ratio – X 9 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.725v AGP Voltage Control – 1.50v Chipset Voltage Control - 1.80v DRAM Voltage Control - 2.9v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Disabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled Sil3114 S-ATA Control – Sata Raid DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 9 T(RCD – Read) – 4 T(RCD – Write) – 4 T(RP) – 4 Cas Latency – 2.5 T(RC) – 14 T(RFC) – 16 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 256 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.31: 3dMark2003: 3dMark2005: Aquamark 3d: Everest Home Edition V2.00.325(Beta): ========== Short Description: Bios Version - 6/19 Tic-Tac XT "Shinobi" Mod 262x9 @ 2358Mhz, 1.725v cpu 29-33 idle 38-41 load 9-2.5-4-4-4 @ 2.9v vdimm Card@350/1000 Share this post Link to post Share on other sites More sharing options...
Guest Darien Posted February 9, 2006 Posted February 9, 2006 DFI Lan Party Ultra B nF2 - N24LDB24 STOCK BIOS AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMH2500FQQ4C IQYHA 0352 RPMW stepping 2x512MB OCZ plat. rev.2 3200 Dual Channel TCC5, Active Cooling 2.85v Leadtek 6800LE nVidia 128M 256-bit Video Card, stock Drivers Seagate Barracuda 160GB 7,200 RPM SATA150 Hard Drive , Sillicon Image Raid 5.0.4.5 Bios, Tmod Sillicon Image Windows Raid driver 1.0.0.8 Mad Dog DVD-RW DL Burner OCZ 520W Powerstream ADJSLI PSU Thermalright SI-97 heatsink + Vantec Tornado TD9238H 92mm adjustable fan * * ========== Genie Bios Settings ======CPU/Dram Clock Settings====== CPU Clock Setting - 250 AGP Clock Setting – 66Mhz CPU Ratio – X 10 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.70v AGP Voltage Control – 1.60v Chipset Voltage Control - 1.80v DRAM Voltage Control - 2.80v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled Sil3114 S-ATA Control – Sata DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 2 T(RCD – Write) – 2 T(RP) – 2 Cas Latency – 2.5 T(RC) – 13 T(RFC) – 15 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 256 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled CPC=disabled Prime95 + 3dMark2001SE + CPU-Z 1.31: 3dMark2003: 3dMark2005: Everest Home Edition V2.00.325(Beta): ========== Short Description: Stock Bios Version - N24LDB24 250x10 @ 2505Mhz, 1.70v 11-2-2-2-2.5 @ 2.84v vdimm This is my base everyday overclock, will update with my extreme overclock once I get it dailed in.. but will be around 255 x 10.5 2.5-2-2-2-11 Share this post Link to post Share on other sites More sharing options...
Guest Darien Posted March 5, 2006 Posted March 5, 2006 DFI Lan Party Ultra B nF2 - Hellfile r3 BIOS AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMH2500FQQ4C IQYHA 0352 RPMW stepping 2x512MB OCZ plat. rev.2 3200 Dual Channel TCC5, Active Cooling 2.89v Leadtek 6800LE nVidia 128M 256-bit Video Card, stock Drivers Seagate Barracuda 160GB 7,200 RPM SATA150 Hard Drive , Sillicon Image Raid 5.1.27 Bios, Tmod Sillicon Image Windows Raid driver 1.0.0.8 Mad Dog DVD-RW DL Burner OCZ 520W Powerstream ADJSLI PSU Thermalright SI-97 heatsink + Vantec Tornado TD9238H 92mm adjustable fan * * ========== Genie Bios Settings ======CPU/Dram Clock Settings====== CPU Clock Setting - 260 AGP Clock Setting – 50Mhz CPU Ratio – X 10 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.775v AGP Voltage Control – 1.80v Chipset Voltage Control - 1.90v DRAM Voltage Control - 2.89v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled Sil3114 S-ATA Control – Sata Raid DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 2 T(RCD – Write) – 2 T(RP) – 2 Cas Latency – 2.5 T(RC) – 13 T(RFC) – 15 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast Command per Clock - Disabled DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 256 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.31: 3dMark2003: 3dMark2005: Everest Home Edition V2.00.325(Beta): ========== Short Description: Hellfire r3 BIOS 260x10 @ 2605Mhz, 1.775v 11-2-2-2-2.5 @ 2.89v vdimm Share this post Link to post Share on other sites More sharing options...
Guest Darien Posted March 27, 2006 Posted March 27, 2006 DFI Lan Party Ultra B nF2 - Hellfile r3 BIOS AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMH2500FQQ4C IQYHA 0352 RPMW stepping 2x512MB OCZ 4000 VX Dual Channel CH5 UTT, Active Cooling 3.37v Leadtek 6800LE nVidia 128M 256-bit Video Card, stock Drivers Seagate Barracuda 160GB 7,200 RPM SATA150 Hard Drive , Sillicon Image Raid 5.1.27 Bios, Tmod Sillicon Image Windows Raid driver 1.0.0.8 Mad Dog DVD-RW DL Burner OCZ 520W Powerstream ADJSLI PSU Thermalright SLK-947U heatsink+ Vantec Tornado TD9238H 92mm adjustable fan * * ========== Genie Bios Settings ======CPU/Dram Clock Settings====== CPU Clock Setting - 254 AGP Clock Setting – 50Mhz CPU Ratio – X 10 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.80v AGP Voltage Control – 1.80v Chipset Voltage Control - 1.90v DRAM Voltage Control - 3.37v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled Sil3114 S-ATA Control – Sata Raid DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 2 T(RCD – Write) – 2 T(RP) – 2 Cas Latency – 2.0 T(RC) – 13 T(RFC) – 15 T(DOE) - 3 T(RRD) - 3 T(W2P) - 4 T(W2R) - 3 T(REXT) - 2 T(R2P) - 2 T(R2W) - 3 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast Command per Clock - Enabled DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 256 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.31: 3dMark2003: 3dMark2005: Everest Home Edition V2.00.325(Beta): ========== Short Description: Hellfire r3 BIOS 254x10 @ 2547Mhz, 1.80v 11-2-2-2-2, 1T @ 3.37v vdimm Share this post Link to post Share on other sites More sharing options...
Snowpro Posted April 17, 2006 Posted April 17, 2006 DFI LanParty NFII Ultra B - 7/28/2004 BIOS AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMG2600FQQ4C - IQYHA 0503 MPMW stepping 2x256MB PC3200 Patriot XBLK Dual Channel Kit (Samsung TCCD) nVidia GeForce 6800LE (Leadtek Winfast A400 LE) 128MB 256-bit Video Card unlocked to 16x1,5vp 77.72 Drivers Maxtor Diamondmax 9 Model 6Y080M0 SATA 80gb 8mb cache 7200 RPM Hard Drive Lite-On DVDRW SOHW-1693S 16x dual layer +/- DVD Recorder Antec Truepower 2.0 480w 20/24 pin ATX power supply Thermalright SI-97a heatsink & Thermaltake UFO 92mm fan ========== Genie Bios Settings: ======CPU/Dram Clock Settings====== CPU Clock Setting - 250 AGP Clock Setting – 67Mhz CPU Ratio – X 9.5 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.725v AGP Voltage Control – 1.60v Chipset Voltage Control - 1.60v DRAM Voltage Control - 2.70v ====Onboard Device Control==== Bios Flash Protect – Enabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Enabled Sil3114 S-ATA Control – Sata DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 9 T(RCD – Read) – 3 T(RCD – Write) – 3 T(RP) – 3 Cas Latency – 2.5 T(RC) – 13 T(RFC) – 15 SuperBypass – Enabled Sync Mode Memory Bypass – Auto Data Scavenged Rate – Fast DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 128 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.29: http://i53.photobucket.com/albums/g51/snow...0B/a9cb6ea1.jpg 3dMark2003: http://i53.photobucket.com/albums/g51/snow...0B/ddad12c2.jpg 3dMark2005: http://i53.photobucket.com/albums/g51/snow...0B/5811af1d.jpg Everest Home Edition V2.01.347: http://i53.photobucket.com/albums/g51/snow...0B/180986f4.jpg ========== Short Description: Bios Version - 7/28/04 250x9.5 @ 2380Mhz, 1.725v 2.5-3-3-9 @ 2.70v vdimm Share this post Link to post Share on other sites More sharing options...
tasr Posted May 30, 2006 Posted May 30, 2006 DFI LANPARTY nFII ULTRA-B - BIOS 06/19/2004 Hellfire 3EG 1/21 RS Rev 3 AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMG2600FQQ4C - AQYHA0346XPMW stepping 2x256MB Mushkins PC3500 BH-5 991095 Black Level II ATI 9800pro 128MB 256-bit Viper John Modified Video Card 1x Western Digital 160GB SATA 7200RPM 8MB Cache HDD ASUS IDE ATAPI Drive 16X-DVD-ROM 48X-CD-ROM Model DVD-E616AG OCZ 520W PowerStream ADJSLI PSU ThermalRight SLK900A Copper HS and Thermaltake 92mm ======================== ====CPU/Dram Clock Settings==== CPU Clock Setting - 236 AGP Clock Setting – 67Mhz CPU Ratio – X 11 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.925v AGP Voltage Control – 1.70v Chipset Voltage Control - 1.70v DRAM Voltage Control - 3.30v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled RTM Lan Device Control - Enabled RTM Lan Boot ROM - Disabled Sil3114 S-ATA Control – SATA DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 2 T(RCD – Write) – 2 T(RP) – 2 Cas Latency – 2.0 T(RC) – 12 T(RFC) – 14 T(DOE) – 5 T(RRD) – 4 T(W2P) – 6 T(W2R) – 3 T(REXT) – 3 T(R2P) – 4 T(R2W) - 5 SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast Command Per Clock – Enabled DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 256 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable – Disabled Prime95 + CPU-Z 1.33.1 + 3dMark2001SE 3dMark2003 3dMark2005 Everest Home Edition V2.20 - Read Everest Home Edition V2.20 - Write ========== Short Description: 236x11 @ 2602Mhz, 1.925v 11-2-2-2-2 @ 3.3v vdimm Share this post Link to post Share on other sites More sharing options...
Gothic Case Posted June 1, 2006 Posted June 1, 2006 DFI LANParty NFII Ultra Rev.A - TicTac's 6/19 XT BIOS AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor, Model AXMH2600FQQ4C - IDYHA0502RPMW stepping 2x512MB Corsair XMS PC3200XLPT TCCD, Brain Power, Stock Heatsinks MSI NX6200-TD256 256MB 128-bit Video Card, nVidia Detonator 81.98 1x Seagate Barracuda (2mb) ST3802110A 80GB 7,200 RPM P-ATA100 Hard Drive LG 4163B Dual LAYER CD/DVD±RW (Black) - OEM (CD-002-SA) Seventeam St420-BKV PSU 420w 24-pin ATX power supply Thermalright SLK-900a copper heatsink + Zalman ZM-F2 92mm fan * * ========== Genie Bios Settings ======CPU/Dram Clock Settings====== CPU Clock Setting - 250 AGP Clock Setting – 67Mhz CPU Ratio – X 9.5 DDR Dram Clock – 1:1 ====OverClocking Control==== CPU Voltage Control – 1.700v AGP Voltage Control – 1.60v Chipset Voltage Control - 1.80v DRAM Voltage Control - 2.90v ====Onboard Device Control==== Bios Flash Protect – Disabled nVidia Lan Chip Control – Enabled nVidia Lan Mac Address – Disabled IEEE1394 Chip Control – Disabled Sil3114 S-ATA Control – Disabled DRAM Configuration Settings: System Performance – Expert CPU Interface – Aggressive Memory Timings – Expert T(RAS) – 11 T(RCD – Read) – 3 T(RCD – Write) – 3 T(RP) – 3 Cas Latency – 2.5 T(RC) – 12 T(RFC) – 15 T(DOE) - Auto T(RRD) - Auto T(W2P) - Auto T(REXT) - Auto T(R2P) - Auto T(R2W) - Auto SuperBypass – Enabled Sync Mode Memory Bypass – Enabled Data Scavenged Rate – Fast Command per Clock - Enabled DIMM1 Driving Strength – Auto DIMM1 Slew Strength – Auto DIMM2 Driving Strength – Auto DIMM2 Slew Strength – Auto DIMM3 Driving Strength – Auto DIMM3 Slew Strength – Auto AGP Aperture Size (MB) – 512 AGP 8X Support – Enabled AGP Fast Write Capability – Enabled CPU Thermal Throttling – Disabled System BIOS Cacheable – Disabled Video RAM Cacheable - Disabled Prime95 + 3dMark2001SE + CPU-Z 1.33: 3dMark2003: 3dMark2005: Everest Ultimate Edition 2006: Read: Write: ========== Short Description: Bios Version - TicTacs 6/19 XT (modded 6/19/04) 250x9.5 @ 2380Mhz, 1.7v 11-3-3-3-2.5 @ 2.9v vdimm Share this post Link to post Share on other sites More sharing options...
Sharptooth+ Posted August 1, 2006 Posted August 1, 2006 DFI LanParty nFII Ultra B - Hellfire 3EG Rev3 AMD Athlon XP Mobile 2600+ Barton Socket 462 Processor Model AXMG2600FQQ4C - IDYHA0503TPMW stepping 2x512MB Mushkin Redline PC4000 UTT CH-5 (slots 2&3) BFG Technologies 6600GT 128MB 128-bit Video Card Nvidia Forceware Drivers 84.21 (564/1130) 1x IBM Deskstar (2mb) 80GB 7,200 RPM ATA100 Hard Drive PATA Plextor DVD-ROM PX-116A PATA Plextor DVD-ROM/-R/+R/RW PX-716A PATA Power PC and Cooling Turbo-Cool 510 SLI PSU 24-pin ATX power supply Thermalright SI-97A heatsink Vantec Tornado TD9238H 92mm with adjustable rheostat ========== [b][size=3]Genie Bios Settings:[/b][/size] [b] ======CPU/Dram Clock Settings======[/b][color=red] CPU Clock Setting................ - 235 AGP Clock Setting................ – 66Mhz CPU Ratio........................ – X 11 DDR Dram Clock................... – 1:1 [/color] [b]=====OverClocking Control=====[/b][color=red] CPU Voltage Control.............. – 1.90v AGP Voltage Control.............. – 1.50v Chipset Voltage Control.......... - 1.80v DRAM Voltage Control............. - 3.20v [/color] [b]=====Onboard Device Control=====[/b][color=red] Bios Flash Protect............... – Disabled nVidia Lan Chip Control.......... – Disabled nVidia Lan Mac Address........... – Disabled IEEE1394 Chip Control............ – Disabled RTM Lan Device Control........... - Enabled RTM Lan Boot Rom................. - Disabled Sil3114 S-ATA Control............ – Disabled [/color] [b][size=3]DRAM Configuration Settings:[/b][/size][color=red] System Performance............... – Expert CPU Interface.................... – Aggressive Memory Timings................... – Expert T(RAS)........................... – 11 T(RCD – Read).................... – 2 T(RCD – Write)................... – 2 T(RP)............................ – 2 Cas Latency...................... – 2.0 T(RC)............................ – 13 T(RFC)........................... – 15 T(DOE)........................... - 3 T(RRD)........................... - 3 T(W2P)........................... - 4 T(W2R)........................... - 3 T(REXT).......................... - 2 T(R2P)........................... - 2 T(R2W)........................... - 3 SuperBypass...................... – Enabled Sync Mode Memory Bypass.......... – Enabled Data Scavenged Rate.............. – Fast Command Per Clock................ - Enabled DIMM1 Driving Strength........... – 4 DIMM1 Slew Rate.................. – 11 DIMM2 Driving Strength........... – 4 DIMM2 Slew Rate.................. – 11 DIMM3 Driving Strength........... – 4 DIMM3 Slew Rate.................. – 11 AGP Aperture Size (MB)........... – 64 AGP 8X Support................... – Enabled AGP Fast Write Capability........ – Enabled CPU Thermal Throttling........... – Disabled System BIOS Cacheable............ – Disabled Video RAM Cacheable.............. - Disabled [/color] ========== ========== Short Description: Hellfire 3EG Rev3 235x11 @ 2591Mhz, 1.90v 11-2-2-2-2 @ 3.2v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now