politenessman Posted April 24, 2005 Posted April 24, 2005 when booting xp from cdrom the very first screen (before press f6 blabla) says "windows is checking your hardware config" and it never gets any farther. i had this prob a couple weeks ago and a dfi tech solved it - clear cmos put 1 stick ram in first orange slot down from top load optimized defaults reboot into bios set cpc to disable, set dram voltage to 2.8 reboot. this worked. tried same thing now, getting original problem. i have tried 1/25,3/10,3/10-p bios pqi turbo, g.skill la, corsair pc3200 v1.1 few cd drives few copies xp several hard drives, sata, pata removed all usb swapped psu all vdimm from 2.5 to 3.5 vdimm jumper both positions 3200+, 3500+ other orange dimm slot x850xt and 6600gt nothing connected except for keyboard, cdrom. hdd, vid card, 1 stick ram/ in and out of case i really dont want to rma this board. i dont have another s939 board here anymore. also this would make 100% dfi products i have owned that malfunctioned and had to be rma'd. any help appreciated. thanx very truly yours, politenessman Quote Share this post Link to post Share on other sites More sharing options...
RGone Posted April 24, 2005 Posted April 24, 2005 Break it down to 'only' just what is needed to install windows. No extra drives, not more than one stick, nothing on in bios like usb or firewire or sound and so forth and clear cmos the official way before starting and then load optimized > Yes> and then go and up the voltage to the memory to 2.8V or so and the vCore some and LDT and chipset a little as well and see if you can install. RGone... Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.