geto Posted April 24, 2005 Posted April 24, 2005 Current settings in bios FSB Bus Freq- 260 LDT/FSB Freq Ratio- x3.0 LDT Bus Transfer- up/down 16 CPU/FSB Freq Ratio- x9.0 PCIe Freq- 100Mhz K8 Cool/Quiet- Disabled CPU Vid Startup- 1.450v CPU VID Control- 1.450v CPU VID Special Control- Above VID*110% LDT Voltage Control- 1.50V Chipset Voltage Control- 1.80V DRAM Voltage Control- 3.00V DRAM Fraq set- 200 1:1 CPC- Enabled Tcl- 2.5 | Trcd- 4 | Tras- 7 | Trp- 4 | Trc- 9 | Trfc- 14 | Trrd- 3 | Twr- 3 | Twtr- 2 | Trwt- 3 | Tref- 3072 | Twcl- Auto Dram Bank Interleave- Enabled Skew Control- Increase Skew Value- 255 Drive Strength- 8 Data Drive Strength- 3 Async Latency- 7 Preamble Time- 5 IdleCycle Limit- 016 Cycle Dynamic Counter- Enable R/W Queue bypass- 16x Bypass Max- 7x 32 byte gran.- Disable(8 Bursts) The timings are based off of Flex's timings. I tried Angrys and Rgones settings and didnt have any success (got errors in memtest). The timings above I can run memtest and get a few errors in test #8, I have tried the DS and DDS in a few different levels and still got errors. Smart Guardian has my temps at 32 Degrees C at idle, ~40-42 running Prime. PWM IC is around 41 and Chipset is at 52 sitting at idle. I havent ran Prime for more than 15-20 minutes. No errors during that time. My equipment is in my sig. Maybe just a little insight on what should be changed. I have searched through and read all the good information, testing different things but still have stability problems. I play Everquest 2, and it usually fails after alittle bit. Hope I nailed everything. Thank you Quote Share this post Link to post Share on other sites More sharing options...
geto Posted April 24, 2005 Posted April 24, 2005 I've changed the timings to mimic CSS_Junkie's. I am at 240x10 and changed Dram Freq set to 166 (5/06). So far no errors on #5 and #8 test in Memtest. Does this appear to be a memory issue? Quote Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted April 24, 2005 Posted April 24, 2005 sounds like typical problem with Corsair memory...can't run 1:1 on our boards for some reason. some users have no problem with Corsair. Mostly I see nothing but problems with all Corsair memory, regardless of what type of Corsair. Quote Share this post Link to post Share on other sites More sharing options...
geto Posted April 24, 2005 Posted April 24, 2005 yea, after no errors in Memtest on 166, it doesn't play well with Windows. Anyone want to buy 2 sticks of corsair 3200xl ram Quote Share this post Link to post Share on other sites More sharing options...
Neophyte Posted April 24, 2005 Posted April 24, 2005 Heyas Geto this link maybe useful for you and you mb/cpu if you didn't already know, kinda sounds like you're on the right track though http://www.xtremesystems.org/forums/showth...?t=50010&page=1 Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.